KTM 250 EXC TPI 2018 Owner's Manual page 146

18 SERVICE WORK ON THE ENGINE
144
Info
Drain the gear oil while the engine is at operating temperature.
E00913-10
401955-11
Preparatory work
(All Six Days models)
–
Remove the engine guard. (
–
Park the motorcycle on a level surface.
–
Place a suitable container under the engine.
Main work
–
Remove gear oil drain plug
–
Let the gear oil drain fully.
–
Thoroughly clean the gear oil drain plug with magnet.
–
Clean the sealing surface on the engine.
–
Mount and tighten gear oil drain plug
a new seal ring.
Guideline
Gear oil drain plug
with magnet
–
2
Remove filler plug and fill up with gear oil.
Gear oil
–
Mount and tighten the oil filler plug.
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use an effective exhaust extraction system when
starting or running the engine in an enclosed
space.
–
Start the engine and check that it is oil-tight.
Finishing work
–
Check the gear oil level. (
(All Six Days models)
–
Install the engine guard. (
p. 98)
1 with magnet.
1
with the magnet and
M12x1.5 20 Nm (14.8 lbf ft)
0.80 l Engine oil
(0.85 qt.) (15W/50)
( p. 162)
p. 143)
p. 98)