KTM 250 EXC TPI 2018 Owner's Manual page 77

–
Position the fork legs.
Bleeder screws
Info
The rebound damping is located in right fork leg REB
(red adjusting screw). The compression damping is
located in left fork leg COMP (white adjusting screw).
Grooves are milled into the side of the upper end of the
fork legs. The second milled groove (from the top) must
H01672-10
be flush with the top edge of the upper triple clamp.
–
Tighten screws
Guideline
Screw, bottom triple
clamp
E00919-12
–
Tighten screw
Guideline
Screw, top steering
head
E00927-10
–
Mount and tighten screw
Guideline
Screw, top
steering stem
E00928-10
–
Tighten screws
Guideline
Screw, top triple
clamp
E00919-13
12 SERVICE WORK ON THE CHASSIS
6 are positioned toward the front.
7
.
M8 15 Nm (11.1 lbf ft)
4
.
M20x1.5 12 Nm (8.9 lbf ft)
8
.
M8 17 Nm (12.5 lbf ft)
9
.
M8 17 Nm (12.5 lbf ft)
Loctite ® 243™
75