18.6
Adding gear oil
Info
Too little gear oil or poor-quality gear oil results in premature wear to the transmission.
Gear oil must only be topped up when the engine is cold.
Preparatory work
–
Park the motorcycle on a level surface.
Main work
–
Detach the foot brake lever spring.
–
Remove screw for checking gear oil level
E00912-10
–
Remove filler plug
–
Add gear oil until it emerges from the drill hole of the gear oil
monitoring screw.
Engine oil (15W/50) (
–
Mount and tighten the gear oil monitoring screw.
Guideline
Screw, gear oil level
check
401955-11
–
Mount and tighten filler plug
–
Attach the foot brake lever spring.
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use an effective exhaust extraction system when
starting or running the engine in an enclosed
space.
–
Start the engine and check that it is oil-tight.
Finishing work
–
Check the gear oil level. (
18 SERVICE WORK ON THE ENGINE
1
.
2
.
p. 162)
M6
10 Nm (7.4 lbf ft)
2
.
p. 143)
145