Startup - Graco HVR Instructions Manual

Startup

Startup
1. Perform all required maintenance tasks. See Main-
tenance on page 35.
2. Check for leaks.
3. Check hydraulic fluid levels.
4. Check pump wet cup fluid levels.
5. Check feed system fluid levels.
6. Turn Main Power Switch to the ON position. The
splash screen will be displayed on the ADM until it is
finished loading.
7. When the ADM is finished loading, press
enable the ADM. The System Status Indicator Light
next to will illuminate green.
8. Press repeatedly to select a different operating
mode then press
NOTE: The Setup screens cannot be accessed when
Disabled mode is the active operating mode. Also, cer-
tain machine functions and setup changes are disabled
when Standby mode is selected.
24
to accept.
to
313873B