3.33
Adjusting combination instrument function
Info
When the vehicle is delivered, only the SPEED/H and SPEED/ODO display modes are activated.
3.34
Setting the clock
Condition
The motorcycle is stationary.
–
Repeatedly press the button
bottom right of the display.
–
Press the button
The Setup menu is displayed and the active functions are
shown.
Info
If no button is pressed for 10–12 seconds, the settings
are automatically saved.
400318-01
If no button is pressed for 20 seconds, or if an impulse
comes from the wheel speed sensor, the settings are
automatically saved and the setup menu is closed.
–
Repeatedly press the button
tion flashes.
The selected function flashes.
Activating the function
–
Press the button
The symbol continues to appear in the display and the
next function appears.
Deactivating a function
–
Press the button
The symbol disappears in the display and the next
function appears.
Condition
The motorcycle is stationary.
–
Repeatedly press the button
bottom right of the display.
–
Press the button
The hour display flashes.
–
Adjust hour display with the button
–
Wait 3 - 5 seconds.
The next segment of the display flashes and can be set.
–
You can set the following segments in the same way as the
400330-01
hours by pressing the button
briefly until H appears at the
for 2–3 seconds.
briefly until the desired func-
.
.
briefly until CLK appears at the
for 2–3 seconds.
and/or button
and the button
WORK 3
.
.
41