Advertisement
–
Feed the wiring harnesses through the opening.
–
Position the license plate holder on the rear.
S03684-01
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
S03685-10
–
Join the plug-in connectors of tail light
cable harness
Info
Pay attention to routing of the wiring harnesses.
–
Install the rear left side cover. (
–
Install the air filter box cover. (
–
Install the 12-V battery. (
S03686-10
–
Position the right footrest and pin.
Info
Only insert the pin to the extent that the spring can still
be mounted.
R01229-10
bn
with the collar bushing.
M6
10 Nm (7.4 lbf ft)
bo
.
EJOT PT
®
2 Nm (1.5 lbf ft)
K60x25‑Z
bt
ck
with the wiring harness.
p. 34)
p. 33)
p. 30)
SETUP 2
and turn signal
15
Advertisement
