–
Remove screws
–
Remove screws
–
Remove the license plate holder with the tail light.
Info
Pay attention to the cable of the tail light.
–
Feed the cable between the fairing parts.
S03679-10
–
Remove screws
the tail light to the side.
S03680-10
–
Position the turn signal on both sides on the license plate
holder, mount nuts with washers and tighten.
–
Position the license plate lamp on the license plate holder,
and mount and tighten screws
–
Mount reflector
S03681-10
bn
.
bo
.
bp
on the license plate holder and hang
bq
.
br
on license plate holder.
SETUP 2
13