Advertisement
2 SETUP
18
–
Attach the displacement stickers to the left and right of the
side cover.
(All special models)
–
Install the engine guard. (
–
Unpack and mount the KTM PowerParts included in the deliv-
ery (optional).
Info
Read the accompanying KTM PowerParts fitting instruc-
tions.
–
Make sure that the reflectors are glued on to the left and right
fork leg.
S04914-01
Info
The reflectors must not be covered by trim parts.
–
Attach the stickers included in the scope of supply (optional).
–
Charge the 12-V battery. (
Guideline
The 12-V battery must be fully charged before it is handed
over to the customer.
H02556-01
Info
The first charging process may take longer with a new
12-V battery.
–
Set kilometers or miles. (
–
Adjust combination instrument function. (
–
Set the clock. (
–
Add 2-stroke oil. (
–
Refuel. (
p. 39)
–
Position all controls in their exact positions on the handlebar.
Tighten all screws.
–
Remove the remaining film, padding, the corrugated card-
board, and the other packaging material.
–
Prepare the vehicle according to the specifications in
KTM Dealer.net for handover to the customer.
Info
Transport mode must be deactivated to be able to start
the motorcycle.
p. 37)
p. 29)
p. 40)
p. 41)
p. 41)
p. 38)
Advertisement
