en Troubleshooting
7.
Carefully lift the inner pane upwards at an angle and
attach the holder
.
8.
Insert the inner pane with the holder
opening.
19 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
If the appliance is defective, call Customer Service.
19.1 Malfunctions
Fault
The appliance is not
working.
The appliance does
not heat up;
lights up in the dis-
play.
26
into the
Cause and troubleshooting
The circuit breaker in the fuse box has tripped.
▶
Check the circuit breaker in the fuse box.
There has been a power cut.
▶
Check whether the lighting in your kitchen or other appliances are working.
Electronics fault
1.
Briefly disconnect the appliance from the power supply by switching off the fuse.
2.
Reset the basic settings to the factory settings.
→ "Basic settings", Page 14
Demo mode is activated.
1.
Briefly disconnect the appliance from the power supply by switching the circuit breaker in
the fuse box off and then on again.
2.
Deactivate demo mode within 5 minutes by changing the last basic setting (depending
on the appliance type or ) to .
→ "Basic settings", Page 14
9.
Screw both screws back in on the left and right of
the appliance door.
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
Only use genuine spare parts when repairing the
appliance.
▶
If the power cord of this appliance is damaged, it
must be replaced by trained specialist staff.
Need help?
Do you have a question about the B6ACM7AG0A and is the answer not in the manual?