Table of Contents
Advertisement
60
GETTING TO KNOW YOUR VEHICLE
TO FOLD DOWN THE REAR SEAT
There are two release levers located on each upper
outboard side of the rear seat. The larger of the two
release levers folds down the seat and the head
restraint simultaneously. The smaller lever folds down
the head restraint independently for improved visibility.
To fold the seat, lift upward on the large release lever
and slowly fold down the seatback. The head restraint
will fold automatically with the seat when this lever is
pulled.
Seatback Release Lever
NOTE:
You may experience deformation in the seat cushion
from the seat belt buckles if the seats are left folded for
an extended period of time. This is normal. By simply
unfolding the seats to the open position, the seat cush-
ion will return to its normal shape over time.
TO RAISE THE REAR SEAT
Raise the seatback and lock it into place. Then, raise
the head restraint until it locks into place. If interfer-
ence from the cargo area prevents the seatback from
fully locking, you will have difficulty returning the seat to
its proper position.
WARNING!
Be certain that the seatback is securely locked into
position. If the seatback is not securely locked into
position the seat will not provide the proper stability
for child seats and/or passengers. An improperly
latched seat could cause serious injury.
Flip And Fold Rear Seat — PHEV Only
The 60/40 split rear seat can be folded down for added
cargo space. To fold the rear seat, proceed as follows:
1. Lift the seat cushion by grabbing the outer edges of
the cushion and pulling upward.
Lift Seat Cushion
2. Flip the seat cushion up and forward.
Flip Seat Bottom Forward
3. Pull the seatback release lever upward fully (located
on the outboard side of the rear seatback).
Lift Seatback Release Lever Up
NOTE:
Pulling the lever partway will fold the head restraint
forward. Pulling it all the way up will release the
seatback.
Advertisement
Table of Contents
