Table of Contents
Advertisement
NOTE:
If your vehicle comes with factory equipped 35 inch
(88.9 cm) tires, a jack lift block is provided in the
rear cargo area. The jack lift block is used to provide
higher ground clearance when changing a flat or
spare tire. When placing the jack lift block under the
jack, be sure the bottom of the jack fits securely
inside of the raised edges of the block.
Jack Lift Box Usage
4. Operate the jack from the front or the rear of the
vehicle. Place the jack under the axle tube, as
shown. Do not raise the vehicle until you are sure
the jack is fully engaged.
Front Lifting Point
NOTE:
Keep the jack and tools aligned while raising the
vehicle to prevent tool damage.
CAUTION!
Do not attempt to raise the vehicle by jacking on loca-
tions other than those indicated.
IN CASE OF EMERGENCY
273
Front Jacking Location
Rear Lifting Point
7
Advertisement
Table of Contents
