Introduction for buttons on remote controller
14
LIGHT button
Press this button to turn off display light on indoor unit. "
controller disappears. Press this button again to turn on display light. "
displayed.
15
Press this button to achieve the on and off of healthy and scavenging functions in
LCD displays "
scavenging functions simultaneously; LCD displays "
button for the third time to quit healthy and scavenging functions simultaneously.
Press the button for the fourth t ime to start healthy function; LCD display "
Press this button again to repeat the operation above.
16
TEMP button
By pressing this button, you can see indoor set temperature, indoor ambient temp-
erature or outdoor ambient temperature on indoor unit's display. The setting on
remote controlleris selected circularly as below:
on indoor unit displays set temperature.
displays indoor ambient temperature.
displays outdoor ambient temperature. (not available)
Note:
Outdoor temperature display is not available for some models. At that time, indoor
unit receives "
's defaulted to display set temperature when turning on the unit.There is no
display in the remote controller.
temperature indicator displays corresponding temperature and automatically turn
B
button
". Press the button for the second time to start healthy and
no display
" signal, while it displays indoor set temperature.
" and "
r, temperature indicator
r, temperature indicator on indoor unit
r, temperature indicator on indoor unit
y.
outdoor ambient temperature, indoor
15
" icon on remote
" icon is
" . Press this
" .
GB