Table of Contents
Advertisement
4.15.3
Clean Fresh tea brewer
1)
Remove pollution with a brush
2)
Wash in warm water .
3)
The scale in the nozzle can be removed by rubbing the nozzle with fingers, and the remaining
scale particles can be rinsed with clear water.
Matching hot water (65 ℃) and cleaning agent according to the ratio of cleaning liquid, soak
4)
the brewer for 15 minutes, then take out and wash with clean water.
5)
Clean it with a clean rag and reinstall it back into the machine. (shown below)
Connecting rod post
Confirm the position of the post is in front of the center
Hexagonal shaft
Put the hexagonal shaft on pothook
(low flow rate when brewing coffee)
Install the dried and cleaned filter back with
screwdriver
Pothook
58
Advertisement
Table of Contents
