Mixer - Jetinno JL18 Service Manual

Calibration data form

4.4.15 Mixer

Mixer-1 parameter setting page
Frequently-used parameter；Rotation speed：；Test mixer；Connection test.
shall not be less than 1/2 of canister
2) Place an empty cup under the outlet of the
Grinder
3) Click Sample dosage：Take the cup when
the powder is finished
4) Put an empty cup on the electronic scale
and discharge to zero，then put it under
the outlet of Grinder
Click Calibration ： select "start" on the
5)
dialog box，when the powder box stops,
the cup is taken out and weighed on the
electronic scale, the machine pops up a
dialog box ，then input the weight value
into the machine, and click ok
Rotation speed
26
test Mixer