Setting The Handset Receiver Volume; Ringer Volume; Setting The Handset Receiver Tone; Setting The Handsfree Volume - Amplicomms BigTel 50 Alarm Plus User Manual

Caution: This telephone is capable of producing very high volume
levels when the amplifier is switched on and the volume control is
set to maximum�
Extreme caution should be taken if the handset is to be shared
between users with normal hearing and those with hearing
impairment�

Setting the handset receiver volume

You can adjust the handset receiver volume using the control (19) /
(refer to page 2).

Ringer volume

You can adjust the ringer volume using the control (20) (refer to page 2).

Setting the handset receiver tone

You can adjust the handset receiver tone using the control (21) if the
Boost function is on (refer to page 2).

Setting the handsfree volume

You can adjust the handsfree volume using the control (22) (refer to
page 2).

Muting the microphone

The microphone in the handset can be activated and deactivated during
a telephone conversation.
Press and hold
Release : Switch the microphone on

Dialling a telephone number using the redial function

Your telephone stores the last phone number dialled.
• Lift the handset or press

Calling back missed calls

The telephone stores the numbers of missed calls in a calls list. For
further information please refer to the chapter „Calls list" on
• Lift the handset or press
using
or alternatively
: Switch the microphone off (muting)
and and press
and then press
, then select the desired entry
.
110
.
page 114.