Deleting Phone Numbers Individually; Deleting All Entries; Alarm Bracelet; Outgoing Alert Message - Amplicomms BigTel 50 Alarm Plus User Manual

• The phone number is stored in the phone book without a name
being assigned. Then enter a name for the phone number (see
"Editing entries in the phonebook").
Note: When the number in the phone book is stored together with a
name, the name entered also appears in the calls list�

Deleting phone numbers individually

• Select an entry using
• Press
• Press

Deleting all entries

• Select an entry using
• Press and hold
The display shows DELETE ALL?.
• Press and hold
Note: Before deleting the phone numbers, check that the entries
have been viewed�

Alarm bracelet

The emergency call unit can be used to dial an emergency services
exchange or persons for assistance.

Outgoing alert message

There is a default outgoing alert message recorded on the telephone.
You can replace this message with one of your own.
automatic emergency call, the phone book numbers assigned ALARM
NUMBER are called automatically.
repeatedly until your emergency call is acknowledged by the person
receiving it through pressing the "0" key. For this reason, you must end
your own alert message clearly telling the receiving party to "���take this
emergency call by pressing the 0 key!".
Note: When recording your message, make sure that the person
called recognize your name in the emergency call� Inform them
clearly that this is an emergency call and that you need help�
and
. The display shows DELETE?.
again. The entry is deleted.
and
for approx. 4 s.
for approx. 4 s. again.
115
.
.
The alert message is played
After activating an