Dialling A Telephone Number From The Phone Book; One-Touch Dialling; Chain Dialling - Amplicomms BigTel 50 Alarm Plus User Manual

• Select the desired entry using
The loudspeaker will be switched on. If you want to proceed the call
using the handset, just lift it up. The loudspeaker will be switched off.

Dialling a telephone number from the phone book

For how to create and store phonebook entries please refer to the
chapter "Phone book" on page 112.
• Lift the handset or press
• Press
entry using
or
• Press
desired entry using
loudspeaker will be switched on. If you want to proceed the call using
the handset, just lift it up. The loudspeaker will be switched off.

One-touch dialling

The one-touch dialling buttons M1 or M2 can be used for normal quick
dial numbers. For how to store one-touch numbers please refer to the
chapter Recording Phonebook entries/Direct memories (M1,M2) page
112 and 113.
• Lift the handset or press
• Press briefly the one-touch memory button
or
• Press briefly the one-touch memory button
• Lift the handset or press
Note: The telephone numbers assigned to the one-touch dialling
buttons can not be deleted� When storing new numbers, the
existing entries are overwritten�

Chain dialling

The function is used in more complex telephone services, e.g. for
telephone banking, call-by-call or calling card procedures. Several
numbers stored in the phone book can be dialled successively when a
connection has already been made. It is also possible to combine
numbers for transfer from the phone book with numbers entered manually.
Numbers stored in the phone book can be chained and transmitted as
required.
, phone book icon display on LCD select the desired
and
, phone book icon display on LCD before select the
and
and
.
and press
and press
.
.
111
and press
.
. The
or .
or .
.