Dialling Pause; Insert A Dialling Pause; R-Button And Others Services; Setting The Flash Time - Amplicomms BigTel 40 Plus User Manual

Dialling pause

When using private branch exchanges, it is necessary to dial an access
code to obtain the dialling tone for an outside line. When using some
older private branch exchanges, it takes a little time before the dialling
tone becomes audible. In the case of such private branch exchanges, a
dialling pause can be inserted after the number for an outside line in order
to continue dialling directly without having to wait for the dialling tone.

Insert a dialling pause:

Press .
After dialling the number for the outside line, the telephone waits approx.
3 seconds before dialling the actual phone number.

R-button and others services

Your telephone supports supplementary services provided by your
telephone network provider, such as brokering, call waiting and
conference facilities.
These supplementary services can be used by implementing the R button.
Contact your telephone network provider with regard to enabling
supplementary services.

Setting the flash time

Set the required Flash time using the sliding switch located on the
underside of the telephone. You can select between 100 ms and 300 ms.

In Case of Problems

Hotline service

Should problems arise with the telephone, please refer to the following
information first. In the case of technical problems, please contact our
hotline service. The number of our service hotline can be found on our
web site: www.amplicomms.com
In the case of claims under the terms of guarantee, please contact your
sales outlet. There is a 2 year period of guarantee.
No telephone calls possible
The telephone line is not connected properly or is defective. Only use the
telephone connection cable supplied.
56