Use On A Private Branch Exchange; To Set The Recall Time; Insert A Dialling Pause - Amplicomms PowerTel 700 User Manual

U
SE ON A PRIVATE BRANCH EXCHANGE

Use on a private branch exchange

If your phone's on an exchange (e.g. you need to dial 9 to get an outside line),
you can transfer calls and use call back by using the R button. You'll need to
check your private exchange manual to find out which timing to use for your ex-
change. You can choose two recall timings: 100ms (Short) and 300ms (Long).

To set the recall time

1. Open your menu by pressing
highlight Base settings and press
2. Scroll using
3. You'll see the current recall timing setting (e.g. Short).
4. Choose the recall timing setting you want (Short or Long) using
and press .

Insert a dialling pause

If you have to dial a number for an outside line and it takes a while to connect,
you can insert a pause so you don't have to wait to hear the dialling tone.
To insert a dialling pause, simply enter the number you usually dial for an out-
side line and then press
dialling pause is active.
54
, then scroll using
or until you highlight Recall and press
for two seconds. A P on your display will show
Helpline 0844 800 6503 (See page 58 for costs and hours of operation)
.
or until you
.
or