Product Overview; Controls - Toro 22323G Operator's Manual

Product Overview

1. Road wheels
2. Track
3. Lift cylinder
4. Loader arms
5. Hood
6. Auxiliary hydraulic
couplers
12
G017858
Figure 4
7. Mount plate
8. Reverse safety plate
9. Control panel
10. Tie-down/lift loop
11. Rear access cover
12. Side panel screen

Controls

Become familiar with all the controls (Figure 5) before you
start the engine and operate the traction unit.
2
3
1
g013016
1. Auxiliary hydraulics lever
2. Key switch
3. Hour meter
4. Fuel gauge
5. Indicator lights and glow
plug switch
6. Throttle lever
Key Switch
The key switch, used to start and stop the engine, has three
positions: off, run, and start.
To start the engine, rotate the key to the start position. Release
the key when engine starts and it will move automatically to
the run position.
To stop the engine, rotate the key to the off position.
Throttle Lever
Move the control forward to increase the engine speed and
rearward to decrease speed.
Reference Bar
When driving the traction unit, use the reference bar as
a handle and a leverage point for controlling the traction
control and the auxiliary hydraulics lever. To ensure smooth,
controlled operation, do not take both hands off of the
reference bar while operating the traction unit.
13
5
4 6 7
11
9 10
Figure 5
7. Loader arm/attachment tilt
lever
8. Parking brake lever
9. Traction control
10. Reference bar
11. Loader control reference
bar
12. Loader valve lock
8
12