F2 Setting Of Out2 - SMC Networks ZSE30AF X576 Series Operation Manual

■[F 2] Setting of OUT2
Set output method of OUT2.
The display colour is linked to the setting of OUT1, and can not be set for OUT2
<Operation>
Press the or
∗: If there is only 1 output or the analogue output is used, the display indicates [---], and this function cannot be set.
button in function selection mode to display [F 2].
Press the button
Set [F 2] based on [F 1] setting of OUT1 (page
Moves on to setting of output mode
25
-28-
to 27)
No.PS※※-OMV1001-C