F2 Setting Of Out2; F3 Response Time - SMC Networks ISE80 Operation Manual

■[F 2] Setting of OUT2
Set output method of OUT2.
The display colour is linked to the setting of OUT1, and can not be set for OUT2
<Operation>
Press the or button in function selection mode to display [F 2].
Set [F 2] based on [F 1] Setting of OUT1 (page
■[F 3] Response time (chattering prevention function)
Select the response time of the switch output.
Output chattering can be prevented by setting the response time.
<Operation>
Press the or button in function selection mode to display [F 3].
Setting of response time
Press the or
Press the button.
Press the button.
button to select response time.
Press the button to set.
Setting of [F 3] Response time completed
Move on to setting output mode.
24
Move on to setting of response time.
Return to function selection mode.
-27-
to 26).
No.PS※※-OMM0003-J