Table of Contents
Advertisement
■[F97] Copy function
The set values of pressure and functions (except for corrected value of fine adjustment of display value) can
be copied. When the pressure range, output and unit specifications are the same, this function becomes
available. The set value can be copied to up to 10 pressure switches simultaneously.
<Connection>
Connect the Pressure switches with the power supply turned off.
Connect the FUNC terminals of the copy source Pressure switch and the copy destination Pressure
switches, and then turn on the power supply.
The copy source Pressure switch is the switch from which the setting is to be copied.
The copy destination Pressure switch is the switch to which the setting is to be copied.
<Operation>
Press the
or
Selection of copy function
or
Press the
button of the copy source Pressure switch in function selection mode to display [F97].
Press the
button.
button to select copy function.
Press the
button to set.
Move on to the selection of copy function.
-41-
No.PS※※-OMV1001-C
Advertisement
Table of Contents
