Using The Memory Function; Saving Embroidery Patterns - Brother NQ3700D Operation Manual

Using the Memory Function

Embroidery data precautions
CAUTION
• When using embroidery data other than our
original patterns, the thread or needle may
break when embroidering with a stitch density
that is too fine or when embroidering three or
more overlapping stitches. In that case, use
one of our original data design systems to edit
the embroidery data.
Types of embroidery data that can be used
Only .pes, .phc, .pen, and .dst embroidery data files can
be used with this machine. Attempting to use data other
than the listed type may cause the machine to
malfunction.
Embroidery pattern size
This machine is compatible with embroidery patterns up
to a maximum of 26 cm × 16 cm (approx. 10-1/4 inches ×
6-1/4 inches).
USB flash drive
Some USB flash drives may not be usable with this
machine. Please visit our website " http://s.brother/cpham/ "
for more details.
Precautions on using the computer to create and save
data
We recommend using the 26 letters of the alphabet
(uppercase and lowercase), the numbers 0 through 9,"-",
and "_" for the name of the file/folder.
Tajima (.dst) embroidery data
• .dst data is displayed in the pattern list screen by file
name (the actual thumbnail image cannot be
displayed).
• Since Tajima (.dst) data does not contain specific
thread color information, it is displayed with our
default thread color sequence. Check the preview and
change the thread colors as desired.

Saving embroidery patterns

You can save embroidery patterns that you have customized
in the machine's memory, or on a USB flash drive.
You can also transfer the patterns to your computer via
wireless network.
Note
• Do not turn the main power to OFF while the
[Saving...] screen is displayed. You will lose the
pattern you are saving.
a Press when the pattern you want to save is in the
pattern editing screen or embroidery settings screen.
b When saving the embroidery pattern in a USB flash
drive, insert the USB flash drive into the USB port on
the machine.
c Select the destination to start saving.
1 Save to the machine's memory.
2 Save to the USB flash drive.
The pattern is saved in a folder labeled "bPocket".
3 Temporarily save to the wireless function pocket.
For the detailed procedure, refer to the manual for PE-
DESIGN (version 11 or later).
* Embroidery patterns which were saved to the
wireless function pocket will be deleted from the
pocket when turning the machine off. Import the
embroidery patterns to PE-DESIGN (version 11 or
later) before turning the machine off.
Using the Memory Function
c
b
a
101
4