Using the Memory Function
Retrieving embroidery patterns
Retrieve embroidery patterns saved in the machine's memory,
or on a USB flash drive, or transferred via wireless network.
a
When retrieving the embroidery patterns from a USB
flash drive, insert the USB flash drive into the USB port
on the machine.
To retrieve embroidery patterns via wireless network,
use PE-DESIGN (version 11 or later) or Design
Database Transfer to transfer the patterns in advance.
For details on transferring embroidery patterns, refer
to the manual for PE-DESIGN or Design Database
Transfer.
b
Press
.
c
Press the desired destination, and then select the
desired embroidery pattern.
1 Retrieve from the machine's memory.
2 Retrieve from a USB flash drive.
3 Retrieve embroidery patterns uploaded to the wireless
function pocket via wireless network.
For the detailed procedure, refer to the manual for PE-
DESIGN (version 11 or later) or Design Database
Transfer.
*
Embroidery patterns which were uploaded via
wireless network will be deleted from the machine
when turning the machine off. Save patterns to the
machine memory if necessary. (page 101)
Memo
• If the embroidery pattern to be retrieved is in a
folder of the USB flash drive, press the key for that
folder. Press
to return to the previous screen.
102
d
Press
• When you press
pattern will be deleted permanently.
• When saving a retrieved pattern, press the
following keys.
1. Press
2. Press the key for the desired destination.
3
2
1
.
Memo
, the selected embroidery
.
: Saves to the machine.
: Saves to the USB flash drive.
: Temporarily saves to the wireless function
pocket.
When saving patterns retrieved via USB or
wireless network to the machine, press
.