Philips HD6161 User Manual page 12

EnglisH
1
Problem
'Error 3' appears
on the display.
"Error 2' or 'error
4' appears on the
display.
The oil or fat
foams strongly
during frying.
Cause
The safety cut-out has
switched off the appliance.
The safety cut-out has
switched off the fryer.
The appliance has to be
examined.
The food contains too
much moisture.
The type of oil or fat you
use is not suitable for
deep-frying food.
You have not cleaned the
inner bowl properly.
Solution
If the fryer does not work anymore, turn to your
Philips dealer or a service centre authorised by
Philips.
To reset the fryer, pull the plug out of the wall
socket and let the oil or fat cool down. Put the
plug in the wall socket again and try to switch
the fryer back on.
Turn to your Philips dealer or a service centre
authorised by Philips.
Dry the food thoroughly before you fry it.
Use frying oil or liquid frying fat of good quality.
Never mix different types of oil or fat.
Clean the inner bowl as described in these
instructions for use.