Table of Contents
Advertisement
Ethernet
Integrated Connection I219-LM
Table 31. Integrated Connection I219-LM
Data Rates supported
Controller Details
Controller Bus Architecture
Wake On LAN
Integrated Memory
Interface/BUS
Data Transfer Mode (example: Bus-Master DMA)
Power Consumption (full operation per data rate
connection speed)
Power Consumption (standby operation)
IEEE Standards Compliance
Hardware Certifications
Boot ROM Support
Network Transfer Mode
10BASE-T (half-duplex)
100BASE-TX (half-duplex)
1000BASE-T (full-duplex)
Environmental
Operating Temperature
Operating Humidity
Operating System Driver Support
Manageability
Management Capabilities Alerting
This term does not connote an actual operating speed of 1 Gb per sec. For high speed transmission, connection to a Gigabit
Ethernet server and network infrastructure is required.
28
Engineering specifications
Engineering specifications
10/100/1000 Mbps
PCIe-based interface for S0 state, SMBus for Sx low power state
Wake-on-LAN and remote wake-up support (Magic Packet and Pattern
Match)
N/A
PCIe x1
N/A
542 mW (Max.)
1000Mb/S Idle 439mW
802.3
N/A
EEPROM (located in SPI)
10 Mb (full/half-duplex)
100 Mb (full/half-duplex)
1000 Mb (full-duplex)
0° C to 85° C (32° F to 185° F)
20% to 80% (non-condensing)
Win7 32/64 bit, Win 8.1/10 64 bit, Linux
WOL, PXE
Intel vPro support with appropriate Intel chipset components
3
Advertisement
Table of Contents
