Maintenance - bemodern 2893 Instructions For Use Manual

Maintenance

WARNING: Before any maintenance or whilst cleaning the exterior of the fireplace, the unit should
be disconnected from the power supply until it has cooled down.
Cleaning the Fire
Cleaning or polishing products are not recommended. Fingerprints or other marks on the front glass
panel can be removed by a piece of soft, damp, lint-free cloth with a good quality household glass
cleaner. The front glass panel should always be completely dried with a clean, lint-free cloth or paper
towel.
CAUTION: Abrasive cleaners should not be used on the glass panel. Liquids should not be sprayed
directly onto any surface of the unit.
Electrical Connections - UK Plug Wiring Instruction
If the plug has to be changed because it is not suitable for your socket, or due to damage, please follow
the wiring instructions shown below.
The wires in the mains lead are coloured in accordance with the following code:
BROWN
BLUE
GREEN / YELLOW
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals in your plug, as follows
The BLUE wire is the NEUTRAL and must be connected to the terminal which is marked with the letter
N or coloured BLACK.
The BROWN wire is the LIVE and must be connected to the terminal that is marked with the letter L or
coloured RED.
The wire which is coloured GREEN / YELLOW must be connected to the terminal which is marked E or
the earth symbol or coloured GREEN or GREEN / YELLOW.
Always ensure that the cord grip is positioned and securely fastened.
WARNING: THIS APPLIANCE MUST BE EARTHED.
If a 13A (BS1363) fused plug is used it must be fitted with a BS1362 13A fuse. If in doubt consult a
qualified electrician.
: LIVE (L)
: NEUTRAL (N)
: EARTH (E)
200797_1 14