Setting Manifold Heaters - Rheem IKONIC RTGH-S11i Training And Service Manual

GENERAL INFORMATION
2. Press the "▼" or "▲" button until "Tankless Con-
fig" is displayed, and press "ENTER" to confirm.
SETTINGS
ENTER
MODE
3. Press the "▼" or "▲" button until "Manifold heat-
ers" is displayed, and press " ENTER " to confirm.
Manifold Heaters
SETTINGS
4. The factory setting is "1".
BACK
SETTINGS
Press the "▼" or "▲" button to select the number
of heaters of be managing " 1 " to "20 ", and press
"ENTER" to confirm. To exit this setting, press
"BACK".
ENTER
MODE
BACK
SETTINGS
Tankless Config
BACK ENTER
STATUS SERVICE MODE
SET POINT
BACK
SETTINGS STATUS SERVICE
BACK ENTER
STATUS SERVICE MODE
OFF
ENTER
STATUS SERVICE MODE
120 °F
BACK
SETTINGS STATUS SERVICE
10
ENTER
STATUS SERVICE MODE
31
1.6.5 NETWORK INSTANCE
1. Press the " SETTINGS " button.
Recirc.Pump Modes
BACK
SETTINGS
Press button
ENTER
MODE
"SETTINGS"
2. Press the " ▼ " or " ▲ " button until "Network in-
stance" is displayed, and press " ENTER " button
to confirm.
BACK
SETTINGS
ENTER
MODE
3. The factory setting is " 1 ". Press the " ▼ " or " ▲
" button to select "1" to "20" for each water heater,
and press "ENTER" to confirm. To exit this setting,
press "BACK" button until the initial screen is dis-
played.
IKONIC Tankless Water Heater Service Manual
ENTER
STATUS SERVICE MODE
SET POINT
to access
BACK
SETTINGS STATUS
Menus
Network Instance
BACK
SETTINGS STATUS
SET POINT
ENTER
STATUS SERVICE MODE
115 °F
BACK
SETTINGS STATUS
10
BACK
SETTINGS STATUS
ENTER
SERVICE MODE
ENTER
SERVICE MODE
ENTER
SERVICE MODE
ENTER
SERVICE MODE