Gasket - Rheem IKONIC RTGH-S11i Training And Service Manual

IKONIC Tankless Water Heater Service Manual
HOW TO REMOVE COMPONENTS

3.4 GASKET

1. Remove the hook film part of the Over Heat Limiter
(OHL ). DO NOT cut the film.
2. Remove flame rod wire from the rod.
Flame Rod
Igniter Rod
70
3. Remove 3 screws from flame rod bracket, and pull
the flame rod
4. The gasket is located between the heat exchanger
and flame rod bracket
NOTE: The spare gasket is located at lower
left in the unit.