Clearing The Current Alarms - Rheem IKONIC RTGH-S11i Training And Service Manual

IKONIC Tankless Water Heater Service Manual
GENERAL INFORMATION
CLEARING HISTORICAL
ALARMS
1. Redo from above step.2, and press the "▼" or
"▲" button until "Clear History?" is displayed, and
press "ENTER" to confirm.
SET POINT
BACK
SETTINGS
Clear History
BACK
SETTINGS
2. Press the "▼" or "▲" button until "Yes" is dis-
played, and press the " ENTER " button. To exit
this setting, press " BACK " button until the initial
screen is displayed.
BACK
SETTINGS
ENTER
STATUS SERVICE MODE
ENTER
STATUS SERVICE MODE
Yes
ENTER
STATUS SERVICE MODE
34
1.7.3 MANIFOLD ROTATE
This tankless water heater can be set to rotate the
"Manager" unit in a manifold system by completing the
following steps:
1. Press the " SERVICE " button on the instance 01
heater.
Current Alarms
BACK
SETTINGS STATUS
2. Press the "▼" or "▲" button until "Manifold ro-
tate?" is displayed, and press the "ENTER" button.
3. The factory setting is "No". Press the "▼" or "▲"
button until "Yes" is displayed, and press the "EN-
TER" button. To exit this setting, press "BACK" but-
ton until the initial screen is displayed.
ENTER
SERVICE MODE
SET POINT
BACK ENTER
SETTINGS STATUS SERVICE MODE
Manifold Rotate
BACK ENTER
SETTINGS STATUS SERVICE MODE
S