Water Inlet Connection 3/4 - Rheem IKONIC RTGH-S11i Training And Service Manual

HOW TO REMOVE COMPONENTS
3.5 WATER INLET CONNECTION ¾"
NOTE: Before removing water inlet connection, turn off water to the water heater by closing the
shut off valve and drain the heater.
1. Remove 3 screw from the bottom plate, as pictured
below.
2. Remove a screw holding freeze protection heater
from water inlet connection.
71
IKONIC Tankless Water Heater Service Manual
3. Remove quick fastener connected to check valve.
NOTE: If for non recirculation model, remove
quick fastener connected water valve.
Check Valve