Reset Wifi Setting - Rheem IKONIC RTGH-S11i Training And Service Manual

IKONIC Tankless Water Heater Service Manual
GENERAL INFORMATION
ENTER
STATUS SERVICE MODE

1.7.6 RESET WIFI SETTING

These steps are to reset the WiFi chip, in the event
that WiFi stops working and WiFi credentials are NOT
changed.
1. Press the " SERVICE " button.
BACK
SETTINGS
BACK
SETTINGS
ENTER
STATUS SERVICE MODE
2. Press the "▼" or "▲" button until "WiFi reset" is
displayed, and press the "ENTER" button.
SETTINGS
SETTINGS
3. Press the "▼" or "▲" button until "Yes" is dis-
played, and press the "ENTER" button.
SETTINGS
BACK ENTER
SETTINGS STATUS SERVICE MODE
SET POINT
BACK
SETTINGS STATUS
Yes
ENTER
STATUS SERVICE MODE
SET POINT
ENTER
STATUS SERVICE MODE
Yes
BACK
SETTINGS STATUS
SET POINT
BACK ENTER
STATUS SERVICE MODE
WiFi Reset
BACK ENTER
STATUS SERVICE MODE
WiFi Reset
BACK
SETTINGS STATUS
Yes
BACK ENTER
STATUS SERVICE MODE
BACK
SETTINGS STATUS
36
ENTER
SERVICE MODE
4. WiFi signal will reset and WiFi will start blinking
again. WiFi will try to reconnect to the stored WiFi
network using the same credentials. Once WiFi is
connected again correctly, WiFi icon will become
solid.
SET POINT
In the event that WIFI credentials are changed
BACK
SETTINGS STATUS
please follow WIFI setup steps again, on page 22.
ENTER
SERVICE MODE
ENTER
SERVICE MODE
ENTER
SERVICE MODE
WiFi Status
BACK
SETTINGS STATUS SERVICE
ENTER
SERVICE MODE
WiFi
SET POINT
BACK
SETTINGS STATUS SERVICE
Current Alarms
BACK ENTER
SETTINGS STATUS SERVICE MODE
ENTER
MODE
ENTER
MODE