Access To The Unit - Mitsubishi Electric MEHP-iB-G07 Instructions For Installation, Use And Maintenance Manual

5 SAFETY REGULATIONS
5.3

Access to the unit

The unit must be placed in a dedicated area where no other equipment can be installed. Access is permitted only to competent personnel (operators,
maintenance personnel and technicians) for inspection, maintenance and repair activities.
The unit must be surrounded by a fence, the perimeter of which must include the clearance area indicated in the dimensional drawings.
Visiting personnel or any other visitors must always be accompanied by an operator. For no reason whatsoever must non-authorised persons be left on
their own with the unit.
• Maintenance technicians must only work on the unit's controls:
• They should not open any panel;
• They must only have access to the control module.
• The installer connects the system to the machine.
• Access for maintenance activities must only be allowed to qualified personnel who has fully read and understood the documentation and instructions.
• Each visitor must be equipped with protective equipment that complies with the current safety regulations, for example:
- overalls;
- gloves;
- safety shoes;
- safety goggles;
- e ar muffles.
• Only qualified and certified individuals to work with refrigerants may work on the refrigerant circuit.
• The use of appropriate personal protective equipment suitable for the activities carried out and meeting current regulations is mandatory. For
example:
- gloves;
- safety shoes;
- dielectric visor;
- dielectric tools.
Installation, use and maintenance manual - Original instructions
EN
83