9 COMMISSIONING AND ADJUSTMENTS
EN
9.5.2
Remote keyboard up to 200 metres
To connect a remote keyboard two "T" shunt boards must be used, one near the controller and one near the remote keyboard.
In case of a remote keyboard monitoring a single unit for a distance below 200 metres, the correct configuration is the following:
6x1 mm
2
Shielded and
twisted
Unit
Figure 9.16: diagram for connecting a remote keyboard up to 200 m.
Figure 9.17: wiring diagram for connecting a remote keyboard up to 200 m.
126
Installation, use and maintenance manual - Original instructions