In such a case make sure the device temperature has adjusted to the ambient temperature before trying a new start-up. GHM GROUP – Greisinger | GHM Messtechnik GmbH Hans-Sachs-Str. 26 | 93128 Regenstauf | GERMANY Phone +49 9402 9383-0 | Fax +49 9402 9383-33 www.greisinger.de...
3. When connecting the device to other devices the connection has to be designed most thoroughly as internal connections in third-party devices (e.g. connection GND with protective earth) may lead to undesired voltage potentials that can lead to malfunctions or destroying of the GMH 3551 and the connected devices.
• The device with pop-up clip at position 180° can be suspended from a screw or the magnetic holder GMH 1300. GHM GROUP – Greisinger | GHM Messtechnik GmbH Hans-Sachs-Str. 26 | 93128 Regenstauf | GERMANY Phone +49 9402 9383-0 | Fax +49 9402 9383-33 www.greisinger.de...
In such a case the last calibration before this one Menu Quit remains valid. GHM GROUP – Greisinger | GHM Messtechnik GmbH Hans-Sachs-Str. 26 | 93128 Regenstauf | GERMANY Phone +49 9402 9383-0 | Fax +49 9402 9383-33 www.greisinger.de...
Page 11
Store Menu Quit to confirm the value; the next calibration step is displayed. GHM GROUP – Greisinger | GHM Messtechnik GmbH Hans-Sachs-Str. 26 | 93128 Regenstauf | GERMANY Phone +49 9402 9383-0 | Fax +49 9402 9383-33 www.greisinger.de | info@greisinger.de...
When the logger is activated (Func Stor or Func CYCL) the hold function is no more available, the key “store” is solely used for the operation of the logger functions. GHM GROUP – Greisinger | GHM Messtechnik GmbH Hans-Sachs-Str. 26 | 93128 Regenstauf | GERMANY Phone +49 9402 9383-0 | Fax +49 9402 9383-33 www.greisinger.de...
XXXXX is the number of the saved data set. If the logger memory is full, the recording stops automatically and the display shows GHM GROUP – Greisinger | GHM Messtechnik GmbH Hans-Sachs-Str. 26 | 93128 Regenstauf | GERMANY Phone +49 9402 9383-0 | Fax +49 9402 9383-33 www.greisinger.de...
Just connect a GAM 3000 to the interface, activate the alarm function of the GMH and the relays output is operating. GHM GROUP – Greisinger | GHM Messtechnik GmbH Hans-Sachs-Str. 26 | 93128 Regenstauf | GERMANY Phone +49 9402 9383-0 | Fax +49 9402 9383-33 www.greisinger.de...
Historical calibration data can be comfortably read out via PC software GMHKonfig and GSOFT3050 or displayed directly at the device: GHM GROUP – Greisinger | GHM Messtechnik GmbH Hans-Sachs-Str. 26 | 93128 Regenstauf | GERMANY Phone +49 9402 9383-0 | Fax +49 9402 9383-33 www.greisinger.de...
A calibration protocol is enclosed to the device ex works. This documents the precision reached by the production process. GHM GROUP – Greisinger | GHM Messtechnik GmbH Hans-Sachs-Str. 26 | 93128 Regenstauf | GERMANY Phone +49 9402 9383-0 | Fax +49 9402 9383-33 www.greisinger.de...
Use an adequate transport package for reshipment, especially for fully functional devices. Please make sure that the device is protected in the package by enough packing materials. GHM GROUP – Greisinger | GHM Messtechnik GmbH Hans-Sachs-Str. 26 | 93128 Regenstauf | GERMANY Phone +49 9402 9383-0 | Fax +49 9402 9383-33 www.greisinger.de...
Regulations of the Council for the Approximation of Legislation for the member countries regarding electromagnetic compatibility (2004/108/EG). Additional fault: <1% GHM GROUP – Greisinger | GHM Messtechnik GmbH Hans-Sachs-Str. 26 | 93128 Regenstauf | GERMANY Phone +49 9402 9383-0 | Fax +49 9402 9383-33 www.greisinger.de...
Make sure to prepare buffer solutions in time as they can only be used after at least 3 hours. Shake well before use. GHM GROUP – Greisinger | GHM Messtechnik GmbH Hans-Sachs-Str. 26 | 93128 Regenstauf | GERMANY Phone +49 9402 9383-0 | Fax +49 9402 9383-33 www.greisinger.de...
Need help?
Do you have a question about the GMH 3551 and is the answer not in the manual?
Questions and answers