Scanner Motor - Ricoh PD-D1 Field Service Manual

Run the cable so there is no slack. Slide the adjustor clamp [A] to adjust the cable slack.
• [B]: Good
• [C]: Not good

Scanner Motor

1. Rear cover ( p.74 "Rear Cover")
2. Scanner motor assembly [A] ( × 2, spring × 1,
3. Scanner motor [A] ( × 2, ground plate [B] × 1)
• Make sure that the ground plate [B] is attached when installing the scanner motor in the scanner
motor bracket.
• Do the scanner image adjustment after replacing the scanner motor
× 1, timing belt × 1)
Scanner Unit
85