Overview Functions Alphabets - Bernina 710 Manual

Functions - Display

overview functions alphabets

38
1 2 4
3
5 6 7 8
9 10 11
12 13 14 15
033805.51.04_2014-02_Manual_B710_EN
⦁ touch «Alphabet»-button
⦁ select Alphabet
⦁ touch «i»-icon
altering alphabet
1 Securing
2 Pattern repeat
3 To alter pattern length
4 Thread tension
5 Needle position
6 Mirror image (Left/Right)
7 Personal memory permanent
8 Security program
9 Mirror image down/up
10 Clear saved setting to default
11 Presser foot indicator
12 Permanent reverse sewing
13 Balance
14 Lettering size in alphabets
15 Presser foot pressure
Securing
⦁ touch icon before sewing
►
single stitch is secured at the begin with four
securing stitches
⦁
touch icon while sewing a single stitch
►
the single stitch is secured at the end
►
the sewing computer stops
⦁
to program the securing function within a pattern
combination
⦁
each individual pattern of the combination can be
secured at the start or the end
pattern repeat
⦁
touch icon 1x
►
number 1 appears: the sewing computer stops at
the end of an individual stitch or stitch combination
⦁ touch icon 2-9x
►
numbers 2-9 appear: the sewing computer stops at
the end of a stitch or a stitch combination after the
number of repeats selected
altering pattern length
⦁ move the round knob in the Display using the finger
►
pattern length (Standard = 100%) is infinitely
variable
⦁ extend/shorten in 1%-steps with the arrow icons or
⦁
touch «Pattern length»-icon
►
pattern length is extended in 100%-steps
Maximum length is 200%, shortest length is 10%.
upper thread tension
⦁
change upper thread tension
►
the respective value is visible in the icon