ABB UNO-DM-2.0-TL-PLUS Manual page 2

IMPORTANT SAFETY INSTRUCTIONS
This manual contains important safety instructions that must be followed during the installation
and maintenance of the equipment.
SAVE THESE INSTRUCTIONS!
Keep this document in a safe place near the inverter for easy access during installation, ope-
ration and maintenance.
THE INSTALLER MUST READ THIS DOCUMENT IN ITS ENTIRETY BEFORE INSTALLING
THIS EQUIPMENT.
Operators are required to read this manual and scrupulously follow the instructions given in
it, since ABB cannot be held responsible for damage caused to people and/or things, or the
equipment, if the conditions described below are not observed.
The purpose of this document is to support the qualified technician, who has received training
and/or has demonstrated skills and knowledge in construction, to install, operate and maintain
the inverter. This manual covers only inverter, not any equipment (photovoltaic modules, external
disconnects, etc) to which it is connected.
Warranty requirements are included in the Terms and Conditions of sale included with the
inverter order.
NOTE: Any changes made to the product or to the installation conditions that hasn't been
approved by ABB will void the warranty.
All pictures and illustrations shown in this user manual are indicatives and must be intended as
support for installation instruction only. Actual product may vary due to product enhancement.
Specifications subject to change without notice. The latest version of this document is availa-
ble on the ABB website.
The products are designed to be connected to and to communicate information and data via a network interfa-
ce. It is the user's sole responsibility to provide and continuously ensure a secure connection between the pro-
duct and the user's network or any other network (as the case may be). The user shall establish and maintain
any appropriate measures (such as but not limited to the installation of firewalls, application of authentication
measures, encryption of data, installation of anti-virus programs, etc) to protect the product, the network, its
system and the interface against any kind of security breaches, unauthorized access, interference, intrusion,
leakage and/or theft of data or information. ABB and its affiliates are not liable for damages and/or losses re-
lated to such security breaches, any unauthorized access, interference, intrusion, leakage and/or theft of data
or information. The data, examples and diagrams in this manual are included solely for the concept or product
description and are not to be deemed as a statement of guaranteed properties. All persons responsible for
applying the equipment addressed in this manual must satisfy themselves that each intended application is su-
itable and acceptable, including that any applicable safety or other operational requirements are complied with.
In particular, any risks in applications where a system failure and/or product failure would create a risk for harm
to property or persons (including but not limited to personal injuries or death) shall be the sole responsibility of
the person or entity applying the equipment, and those so responsible are hereby requested to ensure that all
measures are taken to exclude or mitigate such risks. This document has been carefully checked by ABB but
deviations cannot be completely ruled out. In case any errors are detected, the reader is kindly requested to
notify the manufacturer. Other than under explicit contractual commitments, in no event shall ABB be respon-
sible or liable for any loss or damage resulting from the use of this manual or the application of the equipment.
- 2 -