ABB UNO-DM-2.0-TL-PLUS Manual page 121

WLAN Status
In the WLAN Status sub-menu it's possible to view operation status and
the information about the WLAN board for both of wireless channel and to
switch between the two operation mode ("Station Mode" or "AP Mode").
Wireless channel 1 is always active and it's dedicated to
operate in Access Point mode only.
Wireless channel 2 is dedicated to operate in "Station"
mode. If the inverter is connected to channel 2 it will be
shown all information regarding the wireless parameters.
You will be able to edit the configuration of wireless chan-
nel 2 only connecting to the channel 1.
If you are connected via channel 2, you can switch to Ac-
cess Point mode and disconnect the inverter from the do-
mestic wireless network by clicking "Switch to AP mode"
button.
If the inverter wasn't previously connected to the router, it
will now be possible to connect it by entering the following
wireless network parameters (set on the router):
- IP Selection Mode: DHCP or Static:
If you select the DHCP function (default setup) the rou-
ter will automatically assign a dynamic IP address to the
inverter whenever it tries to connect to the user network.
With Static, the user can assign a fixed IP address to
the system. The data which has to be entered in order
for IP static address assigning to take place will appear.
Complete the additional fields at the bottom of the scre-
en (all the fields are mandatory with the exception of the
secondary DNS server).
- Available Network (SSID):
Identify and select your own (home) wireless net-
work from all those shown in the SSID field (you
can carry out a new search of the networks that
can be detected with the Update button
Once the network has been selected, confirm.
- Password (wireless network password):
Enter the password for the destination network (if neces-
sary) and start the connection attempt (it will take a few
seconds).
Click on "Connect" button to switch the inverter wireless
connection from point to point to the home wireless net-
work.
- 121 -
7 - Operation
).