CAS PD-II Owner's Manual
Hide thumbs Also See for PD-II:

Advertisement

Quick Links

PD-
ECR Interface Scale
O W NER'S MANUAL
9002-PD2-0011-1
2004. 8

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PD-II and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for CAS PD-II

  • Page 1 ECR Interface Scale O W NER’S MANUAL 9002-PD2-0011-1 2004. 8...
  • Page 2 CONTENTS PRECAUTIONS PREFACE NAMES AND FUNCTIONS OPERATIONS 1. General Weighing 2. ECR Interface ERROR MESSAGE SPECIFICATIONS...
  • Page 3 This will minimize maintain periodical check by your Internal mechanism could be damaged. moving. Do not hold by the platter. contact your CAS defect or electric shock. CAS authorized dealer. authorized dealer immediately for proper repair.
  • Page 4 This manual will help you with the proper operation and care of your new PLATTER CAS PD-II. POLE TYPE Please review the PD-II sacle manual before you use the scale and keep it handy DISPLAY CABLE for future reference. DISPLAY...
  • Page 5 Place an item on the platter. When the ST(Stable) lamp is 0n, read the weight. 2. ECR Interface PD-II can interface with most ECRs by selecting TYPE 0 to TYPE 6. ECR Type Selection Make sure that power is OFF. While pressing "#" key, turn on the power.
  • Page 6 9600 Baud Rate, 7 Date bit, Even Parity. 1 Stop bit ERROR MESSAGE ERROR SOLUTIONS REASONS Failure of A/D Module Call your CAS dealer Set the platter empty Err 1 An error of initial zero range Make sure there is a platter on the scale...

Table of Contents