Wireless Connections; Bluetooth; Bluetooth Usb Adapter; Troubleshooting - Bosch KTS 515 Instructions Manual

en | 14 | KTS 515 | Description of unit
2.5

Wireless connections

i
Users of wireless systems are responsible for
compliance with the applicable directives and
restrictions in the country concerned.
A "wireless system" in the sense of the European
Directive RED 2014/53/EU (Radio Equipment
Directive) is an electrical or electronic product
(component) that transmits and/or receives radio
waves as permitted for the purpose of wireless
communication and/or radiolocation.
WLAN and Bluetooth instructions can be found in the
separate instructions "Data protection, data security,
wireless connections".
http://mediathek.bosch-automotive.com/files/common/documents/1689/989393.pdf
These instructions must be carefully studied prior to
start-up, connection and operation of the KTS 515 and
must always be observed.
2.6

Bluetooth

2.6.1

Bluetooth USB adapter

The Bluetooth USB adapter included in the scope of
delivery is inserted into the PC/laptop and provides
a radio link to components of KTS 515 capable of
wireless communication.
2.6.2

Troubleshooting

i
In the event of problems with the Bluetooth radio
link, refer to the information in the separate
instruction "Bluetooth USB Adapter".
http://mediathek.bosch-automotive.com/files/bosch_wa/989/277.pdf
|
1 689 989 232 2023-01-24
3.

Description of unit

3.1

Intended use

The KTS 515 is a module for on-board diagnosis
(referred to in the following as OBD).
Together with the "On-board diagnosis" PC software,
the KTS 515 can implement the following functions:
R
On-board diagnosis with e.g.
$
Fault memory readout
$
Erasing of fault memory
$
Display of actual values
$
Activation of actuators
$
Readout of Lambda values
3.2

Prerequisites

Computer with installed "BEA-PC", "CDC" and
"On-Board Diagnosis 2.0" software.
i
For further information see Section 4.2.
3.3

Scope of delivery

i
The scope of delivery depends on the product
variant ordered as well as the special accessories
ordered, and can deviate from the following list.
Designation
System tester KTS 515
Bluetooth USB adapter
OBD diagnostic cable 1.5 m
USB connecting cable 3 m
Power supply unit
Case
Mount
with self-tapping screw (2x)
and oval head screw (3x)
Product description
Order number
–
–
1 684 465 555
1 684 465 562
1 687 023 693
1 685 438 648
–
1 689 989 232
Robert Bosch GmbH