User Information; Important Notes; Safety Instructions; Ec Declaration Of Conformity - Bosch FSA 500 Original Instructions Manual

en 20 | FSA 500 | User information
2.

User information

2.1

Important notes

Important information on copyright, liability and warran-
ty provisions, as well as on equipment users and com-
pany obligations, can be found in the separate manual
"Important notes on and safety instructions for Bosch
Test Equipment". These instructions must be carefully
studied prior to start-up, connection and operation of
the FSA 500 and must always be heeded.
2.2

Safety instructions

All the pertinent safety instructions can be found in the
separate manual "Important notes on and safety inst-
ructions for Bosch Test Equipment". These instructions
must be carefully studied prior to start-up, connection
and operation of the FSA 500 and must always be hee-
ded.
2.3

EC Declaration of Conformity

FSA 500 bears the CE mark in accordance with the
applicable EC Directives. The EC Declaration of Confor-
mity is available for download as Adobe PDF document
from
http://downloads.bosch-automotive.com
2.4

Electromagnetic compatibility (EMC)

FSA 500 satisfies the criteria of the European Directive
EMC 2014/30/EU.
This device is not intended for use within residential
areas and cannot provide sufficient protection in such
environments.
2.5

Measuring category

FSA 500 complies with the general safety requirements
for electrical testers, measuring instruments and acces-
sories in EN 61010-1 and EN 61010-2-030.
FSA 500 is designed for test and measurement circuits
with no direct mains voltage system connection (Cate-
gory I, motor vehicle testers).
2.6

RED (Radio Equipment Directive)

Robert Bosch GmbH hereby declares that the radio
equipment type FSA 500 conforms to the European Di-
rective 2014/53/EU. The complete text of the EU decla-
ration of conformity is available from the following web
address:
http://www.downloads.bosch-automotive.com
i
In non-European countries, the corresponding natio-
nal regulations on the operation of wireless devices
in the 2.4 GHz and 5 GHz frequency band must be
heeded (e.g. WLAN or Bluetooth).
|
1 689 989 411 2019-04-01
.
2.7

Wireless connections

i
Users of wireless systems are responsible for com-
pliance with the applicable directives and restric-
tions in the country concerned.
A "wireless system" in the sense of the European Di-
rective RED 2014/53/EU (Radio Equipment Directive)
is an electrical or electronic product (component) that
transmits and/or receives radio waves as permitted for
the purpose of wireless communication and/or radiolo-
cation.
WLAN and Bluetooth instructions can be found in the
separate instructions "Data protection, data security,
wireless connections".
http://mediathek.bosch-automotive.com/files/common/documents/1689/989393.pdf
These instructions must be carefully studied prior to
start-up, connection and operation of the FSA 500 and
must always be observed.
2.8

Bluetooth

2.8.1

Bluetooth USB adapter

The Bluetooth USB adapter included in the scope of
delivery is inserted into the PC/laptop and provides a
radio link to components of FSA 500 capable of wireless
communication.
2.8.2

Troubleshooting

i
In the event of problems with the Bluetooth radio
link, refer to the information in the separate instruc-
tion "Bluetooth USB Adapter".
http://mediathek.bosch-automotive.com/files/bosch_wa/989/277.pdf
2.9 Information on
Bosch Connected Repair
The "Bosch Connected Repair" software (CoRe) makes it
possible to exchange customer and vehicle information
as well as protocols in the workshop. For this, the tes-
ters (CoRe clients) are connected to a central computer
(CoRe server) via the computer network.
Related documents:
Current overview of products supporting
Bosch Connected Repair:
http://mediathek.bosch-automotive.com/files/common/documents/1689/989386.pdf
Notes on system requirements, installation and other

information on Bosch Connected Repair:

http://mediathek.bosch-automotive.com/files/common/documents/1689/989372.pdf
Robert Bosch GmbH