User Instructions; Intended Users; Fcc Compliance (Usa); Open-Source Software (Oss) - Bosch MTS 6531 Operating Instruction

en 6 | MTS 6531 | User instructions
2.

User instructions

Before commissioning, connecting and operat-
ing this product, it is absolutely essential that
the operating instructions/owner's manual
and, in particular, the safety instructions are
studied carefully. By doing so you can eradicate
any uncertainties about this product and any
associated safety risks upfront; something which
is in the interests of your own safety and will ul-
timately help avoid damage to the device. When
this product is handed over to another person,
not only the operating instructions but also the
safety instructions and information on its desig-
nated use must be handed over to the person.
2.1

Intended users

The product may be used by skilled and instruc-
ted personnel only. Personnel scheduled to be
trained, familiarized, instructed or to take part
in a general training course may only work with
the product under the supervision of an experi-
enced person.
All work on electrical devices must be carried
out by individuals with sufficient knowledge and
experience in the fields of electrical and hydraulic
equipment.
2.2

FCC Compliance (USA)

MTS 6531 complies with the require-
ments of Section 15 of the FCC Rules. The follo-
wing conditions apply regarding operation:
R
MTS 6531 must not cause any harmful
disruptions;
R
MTS 6531 must permit reception of
interference, including interference that can
cause unwanted operation.
The MTS 6531 was tested and com-
plies with the limits for a Class A digital device
as defined in Part 15 of the FCC regulations.
These limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment. MTS 6531 may generate,
use and emit energy at radio frequencies that
can disrupt radio communication if installed
improperly or used in a manner inconsistent
with the operating instructions. Operation of
MTS 6531 in a residential area is likely
to cause harmful interference, in which case the
user will be required to correct the interference
at his or her expense.
|
1 689 989 445 2019-07-01
i
All changes or modificati-
on to the MTS 6531 that
are not expressly allowed by
Robert Bosch GmbH
can result is loss of permission to operate
MTS 6531.
2.3

Open-source software (OSS)

For an overview of the open-source software
licenses, see "C:\PROGRAM FILES (X86)\
BOSCH\VTX-VCI\VCI SOFTWARE (6531-BOSCH)\
LEGAL".
2.4 Electromagnetic compatibility
(EMC)
The MTS 6531 satisfies the requirements
of the EMC directive 2014/30/EU.
i
MTS 6531 is a class/category
product in accordance
MTS 6531 may cause high-frequency
household interference (radio interference)
so that interference suppression may be
necessary. In such cases, the operator may
be required to take appropriate action.
2.5

Range of application

The MTS 6531 is intended for indoor use
only.
R
Do not expose MTS 6531 to rain
or moisture and prevent the formation of
condensation.
R
Degree of contamination 2, keep area around
MTS 6531 clean.
2.6 Wireless link (Bluetooth and
WLAN)
!
MTS 6531 users are responsible for
compliance with the applicable directives and
restrictions in the country concerned.
A
with EN 61 326. The
Robert Bosch GmbH