Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Swing-N-Slide Manuals
  4. Play Sets & Playground Equipment
  5. WS 8359
  6. Assembly instructions manual

Swing-N-Slide WS 8359 Assembly Instructions Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
WS 8359
IMPORTANT!!
PLEASE READ BEFORE BEGINNING ASSEMBLY!!
Please make sure all lumber, hardware and accessory parts are accounted for.
If you are missing anything, please DO NOT RETURN to the store where purchased.
Please call our Customer Service Department at the number below.
ASSEMBLY INSTRUCTIONS
Swing•N•Slide • 166 Etowah Industrial Ct. • Canton, GA 30114
Email us at: playsupport@backyardproducts.com or call us at 1-800-882-0272
LDR 03-01-2022
© Swing-N-Slide Inc.
Printed in USA
LA 8400

Advertisement

loading
Need help?

Need help?

Do you have a question about the WS 8359 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Swing-N-Slide WS 8359

Summary of Contents for Swing-N-Slide WS 8359

  • Page 1 WS 8359 IMPORTANT!! PLEASE READ BEFORE BEGINNING ASSEMBLY!! Please make sure all lumber, hardware and accessory parts are accounted for. If you are missing anything, please DO NOT RETURN to the store where purchased. Please call our Customer Service Department at the number below.
  • Page 2 Safety Checklist for Swing-N-Slide Play Sets and Accessories Observing the following statements and warnings reduces the likelihood of serious or fatal injury  This playset has been designed for use by a maximum of twelve (12) occupants at one time having a combined weight of 1,260 pounds.  This playset is intended for use by children from (2) to (10) years of age.  On-site adult supervision for children of all ages is recommended.  Instruct children not to walk close to, in front of, behind, or between moving items.  Instruct children not to twist swing chains or ropes or loop them over the top support bar since this may reduce the strength of the chain or rope.  Instruct children to avoid swinging empty seats.  Teach children to sit in the center of the swings with their full weight on the seats.  Instruct children not to use the equipment in a manner other than intended.
  • Page 3 PLAYSET MAINTENANCE Cosmetic defects that do not affect the structural integrity of the product, or natural defects of wood such as warping, splitting, checking, twisting, shrinkage, swelling or any other physical properties of wood that do not present a safety hazard, are not covered by our warranty. To help minimize these natural defects we recommend applying a sealer or stain every two or three years, or more often as the climate dictates. Power washing, sanding or other preparatory methods should be used prior to sealing or staining. Periodic maintenance is required to ensure safe enjoyment of your playset and accessories. Read and follow the Playset Checklist below to reduce the likelihood of serious or fatal injury. Use the checklists as a guide for proper playset care and maintenance. PLAYSET CHECKLIST At the beginning of each play season: Tighten all hardware. Lubricate all metallic moving parts per manufacturer's instructions. Check all protective coverings on bolts, pipes, edges, and corners. Replace if they are loose, cracked, or missing. Check all moving parts including swing seats, ropes, cables, and chains for wear, rust, or other deterioration. Replace as needed. Check metal parts for rust. If found, sand and repaint using a nonleaded-based paint meeting the requirements of 16 CFR 1303. Check all wood members for deterioration and splinters. Sand down splinters and replace deteriorating wood members. Reinstall any plastic parts, such as swing seats or any other items that were removed for the cold season. Rake and check depth of loose fill protective surfacing materials to prevent compaction and to maintain appropriate depth. Replace as necessary. Twice a month during play season: Tighten all hardware. Check all protective coverings on bolts, pipes, edges, and corners. Replace if they are loose, cracked, or missing. Rake and check depth of loose fill protective surfacing materials to prevent compaction and to maintain appropriate depth. Replace as necessary. Once a month during play season: Lubricate all metallic moving parts per manufacturer's instructions.

  • Page 4: Select Protective Surfacing

    PLAYGROUND SURFACING MATERIALS SECTION 4 OF THE CONSUMER PRODUCT SAFETY COMMISSION'S OUTDOOR HOME PLAYGROUND SAFETY HANDBOOK Select Protective Surfacing One of the most important things you can do to reduce the likelihood of serious head injuries is to install shock-absorbing protective surfacing under and around your play equipment. The protective surfacing should be applied to a depth that is suitable for the equipment height in accordance with ASTM Specification F 1292. There are different types of surfacing to choose from; whichever product you select, follow these guidelines: NOTE: Do not install home playground equipment over concrete, asphalt, or any other hard surface. A fall onto a hard surface can result in serious injury to the equipment user. Grass and dirt are not considered protective surfacing because wear and environmental factors can reduce their shock absorbing effectiveness. Carpeting and thin mats are generally not adequate protective surfacing. Ground level equipment - such as a sandbox, activity wall, playhouse or other equipment that has no elevated play surface - does not need any protective surfacing. Maximum fall height for this playset is 83''. Loose-Fill Materials:  Maintain a minimum depth of 9 inches of loose- fill materials such as wood mulch/chips, engineered wood fiber (EWF), or shredded/recycled rubber mulch for equipment up to 8 feet high; and 9 inches of sand or pea gravel for equipment up to 5 feet high. NOTE: An initial fill level of 12 inches will compress to about a 9- inch depth of surfacing over time. The surfacing will also compact, displace, and settle, and should be periodically refilled to maintain at least a 9- inch depth.
  • Page 5 PLAYSET SAFETY ZONE 28'-0" 14'-0" 14'-0" 6'-0" 28'-5 15/16" 16'-5 15/16" 6'-0" 6'-0" 6'-0" 6'-0" 16'-5 7/16" 30'-5 7/16" MINIMUM USE ZONE FOR PLAY EQUIPMENT SHALL EXTEND NO LESS THAN 72” FROM ALL SIDES OF THE PLAY STRUCTURE. SWING USE ZONE EXTENDS NO LESS THAN 168”. SWINGS MUST HAVE A MINIMUM CLEARANCE OF 8”...

  • Page 6: Tools Required

    TOOLS REQUIRED DRILL 1/2” & 7/16’’ SOCKETS & HAMMER ADJUSTABLE TAPE MEASURE WRENCH WRENCH SCREWDRIVER PHILLIPS BIT CARPENTER SAFETY GLASSES 1/8” DRILL BIT SQUARE HELPFUL ASSEMBLY INFORMATION Your playset consists of several boxes or modules. It is important to ensure all lumber, accessories and hardware is accounted for.
  • Page 7 (2) [PF 6010] 1’’ x 3-3/8’’ x 47-1/2’’ TOWER MODULE SA 6051 /SA 6022 (1) [PF 6011] 1’’ x 3-3/8’’ x 47-1/2’’ BOARD LIST (4) [PF 6062] 1’’ x 3-3/8’’ x 42-1/2’’ ROOF A-FRAME TOWER MODULE: SA6042 (4) [PF 6164] 3’’ x 3’’ x 94’’ (2) [PF 6063] 3/4’’...
  • Page 8 Please call our Customer Service Department at the number below. ASSEMBLY INSTRUCTIONS Swing•N•Slide • 1212 Barberry Drive • Janesville, Wisconsin 53545 Visit our web site at: www.swing-n-slide.com or call us at 1-800-888-1232 LDR 03-08-2018 © Swing-N-Slide Inc. Printed in USA...
  • Page 9 TOWER MODULE SA 6052 HARDWARE 5/16” Washer (x24) 5/16’’ Loc Washer (x12) 5/16-18 T-Nut (x12) Small FS2831 FS2831 FS2831 FS2831 3” Deck Screw (x8) FS2831 FS2831 5/16” Loc Nut (x9) FS2830 FS2830 FS2830 2-1/2 2-1/2 FS2830 2-1/2” Deck Screw (x125) 2-1/2 FS2830 2-1/2...

  • Page 10: Board List

    (10) [PF 6000] 5/8’’ x 5-3/8’’ x 33-3/4’’ /16’’ x 3’’ x 62’’ A-FRAME SUPPORT TERRACE MODULE SA 6031 x2 (2) [PF 6060] 5/8’’ x 5-3/8’’ x 13’’ SUN ’’ x 3-3/8’’ x 83’’ A-FRAME LEGS BOARD LIST (4) [PF 6001] 5/8’’ x 5-3/8’’ x 9-1/4’’ ’’...
  • Page 11 (5) [PF 6005] 3/4’’ x 3-3/8’’ x 42’’ (1) [PF 6034] 1-3/8’’ x 3-3/8’’ x 66-1/4’’ LADDER SUPPORT-L (2) [PF 6003] 3/4’’ x 3-3/8’’ x 35-7/8’’ (1) [PF 6035] 1-3/8’’ x 3-3/8’’ x 66-1/4’’ LADDER SUPPORT-R (2) [PF 6002] 3/4’’ x 3-3/8’’ x 22-1/2’’ LADDER MODULE SA 6032 PICNIC TABLE MODULE SA 6037 (1) [PF 6029] 5/8’’...
  • Page 12 TURBO TUBE SLIDE (HARDWARE FOR SLIDE ASSEMBLY WITH SLIDE PARTS) Five Foot Turbo Slide (x1) BOARD LIST SA 6029 (2) [PF 6144] 1-3/8’’ x 3-3/8’’ x 47-1/2’’ (1) [PF 6143] 1-3/8’’ x 3-3/8’’ x 46’’ (1) [PF 6142] 1-3/8’’ x 3-3/8’’ x 30-5/8’’ (1) [PF 6141] 1-3/8’’...
  • Page 13 STEP 1 6’’ 47-1/2’’ 2-1/2’’ Screws Flush 6’’ 2-1/2’’ Screws T-Nut Small 2-1/2’’ Screws 5/16-18 X 4’’ Hex Head Bolt 5/16’’ Washer 5/16’’Loc-Washer 59-1/4’’ FRAME A 2-1/2’’ Screws 1-1/2’’ JOINTS 2-1/2” Deck Screw (x14) 1. Assemble Frame A as shown above. Note: Tap each T-Nut into its pre-drilled hole until the metal tangs sink fully into the wood.
  • Page 14 STEP 2 6’’ 47-1/2’’ 2-1/2’’ Screws Flush 6’’ 2-1/2’’ Screws T-Nut Small 2-1/2’’ Screws 5/16-18 X 4’’ Hex Head Bolt 5/16’’ Washer 5/16’’Loc-Washer 2-1/2’’ Screws 2-1/2’’ Screws 59-1/4’’ 31’’ FRAME B 2-1/2’’ Screws 1-1/2’’ Hint!! Use parts from your Tower Box. BOTH SIDES 2-1/2”...
  • Page 15 STEP 3 Check to make sure 2-1/2’’ Screws 2-1/2’’ Screws structure is square. Flush 2-1/2’’ Screws 2-1/2’’ Screws 59-1/4’’ Flush 2-1/2’’ Screws NOTE: Board mounts 2-1/2’’ Screws to inside of upright. 2-1/2’’ Screws FRAME A 2-1/2” Deck Screw (x16) 1. Attach support boards to Frame A as shown.
  • Page 16 STEP 4 2-1/2’’ Screws Check to make sure structure is square. 2-1/2’’ Screws 2-1/2’’ Screws 2-1/2’’ Screws 2-1/2’’ Screws FRAME B NOTE: Board mounts to inside of upright. FRAME A 2-1/2’’ Screws 2-1/2” Deck Screw (x16) 1. Attach Frame A to Frame B as shown.
  • Page 17 STEP 5 1-3/4’’ Screws Per Board Flush PF 6149 1-3/8’’ x 3-3/8’’ x 15-1/2’’ DECK SUPPORT Flush 1-3/4’’ Screw per joint (4) 3’’ Screw NOTE: PRE-DRILLED HOLES 1-3/4” Deck Screw (x6) 3” Deck Screw (x4) 1. Install Deck Supports as shown.

  • Page 18: Top View

    STEP 6 PF 6003 3/4’’ x 3-3/8’’ x 35-7/8’’ 1-3/4’’ Screws 2-1/2’’ Screws 1-3/4’’ Screws PF 6003 3/4’’ x 3-3/8’’ x 35-7/8’’ 2-1/2’’ Screws PF 6011 1’’ x 3/8’’ x 47-1/2’’ 16-1/2’’ FS2831 PF 6011 1’’ x 3/8’’ x 47-1/2’’ FS2830 2-1/2 16-1/2’’...
  • Page 19 STEP 7 PF 6008 3/4’’ x 5-3/8’’ x 42’’ 1-3/4’’ Screws per board 1-3/4” Deck Screw (x42) 1. Install Deck Boards as shown. NOTE: Standard gap between deck boards is 3/8’’.
  • Page 20 STEP 8 Check to make sure structure is square. 47-1/4’’ FRAME A 2-1/2’’ Screws 5/16-18 X 4’’ Hex Head Bolt 5/16’’Loc-Washer 5/16’’ Washer T-Nut Hint!! Use parts from your Terrace Boxes. Small 2-1/2” Deck Screw (x8) 1. Install Deck Support Board as shown.
  • Page 21 STEP 9 2’’ Screws Check to make sure structure is square. Flush 2’’ Screws 5/16-18 X 2’’ Hex Head Bolt 47-1/4’’ 5/16’’Loc-Washer 5/16’’ Washer 2’’ Screws 2’’ Screws T-Nut Small 2’’ Screws Flush FS2831 FRAME FS2830 C AND D 2-1/2 FS2829 2”...
  • Page 22 STEP 10 Flush With Outside 2-1/2’’ Screws Face of 1-3/8’’ x 3’’ Flush With Check to make sure structure is square. Top of Flush With Frame Flush With Top of Outside Frame Face of 1-3/8’’ x 3’’ 2-1/2’’ Screws 2-1/2’’ Screws Flush With Outside Face of...
  • Page 23 STEP 11 Flush With Outside Face of 1-3/8’’ x 3’’ 2-1/2’’ Screws Check to make sure Flush With structure is square. Top of Flush With Frame Outside Flush With Face of Top of 1-3/8’’ x 3’’ Frame 2-1/2’’ Screws 2-1/2’’ Screws Flush With Outside Face of...
  • Page 24 STEP 12 Check to make sure structure is square. 2-1/2’’ Screws 2-1/2’’ Screws 2-1/2’’ Screws 2-1/2’’ Screws 2-1/2’’ Screws 2-1/2’’ Screws 79’’ 2-1/2’’ Screws 2-1/2’’ Screws 2-1/2’’ Screws FRAME D FS2831 FRAME C 2-1/2’’ Screws FS2830 2-1/2” Deck Screw (x26) 2-1/2 FS2829 1.
  • Page 25 STEP 13 PF 6150 3/4’’ x 3-3/8’’ x 24-3/4’’ Check to make sure structure is square. 10-5/8’’ 10-5/8’’ PF 6150 3/4’’ x 3-3/8’’ x 24-3/4’’ PF 6150 3/4’’ x 3-3/8’’ x 24-3/4’’ TOP VIEW 1-3/4’’ Screws 1-3/4’’ Screws 1-3/4’’ Screws PF 6061 1-1/2’’...
  • Page 26 STEP 14 PF 6135 3/4’’ x 5-3/8’’ x 26-1/4’’ Note: Holes 1-7/8’’ From Edge on This Side PF 6135 3/4’’ x 5-3/8’’ x 26-1/4’’ 1-3/4’’ Screws per board All Boards 1-3/4’’ Screws Flush per board Note: Holes 1-7/8’’ From Edge on This Side 1-3/4”...
  • Page 27 STEP 15 PF 6005 3/4’’ x 3-3/8’’ x 42’’ 2-1/2’’ Screws 53-7/8’’ PF 6005 3/4’’ x 3-3/8’’ x 42’’ 53-7/8’’ 2-1/2’’ Screws 2-1/2” Deck Screw (x12) 1. Attach Gap Filler Boards as shown.
  • Page 28 STEP 16 PF 6022 3/4’’ x 3-3/8’’ x 19-1/2’’ 2’’ Screws 50-5/8’’ PF 6022 3/4’’ x 3-3/8’’ x 19-1/2’’ 2’’ Screws 50-5/8’’ PF 6005 3/4’’ x 3-3/8’’ x 42’’ 2” Deck Screw (x12) 1. Install Barrier Support Boards as shown.

  • Page 29: Inside View

    STEP 17 2-7/8’’ (2) PF 6021 5/8’’ x 5-3/8’’ x 30-3/4’’ 1-1/4” Screws per board Panel Bracket 3/4’’ Pan Screws #12 x 3/4” Pan Screw (x4) 1-1/4” Deck Screw (x8) INSIDE VIEW 1. Install Barrier Boards as shown.
  • Page 30 STEP 18 (2) PF 6021 5/8’’ x 5-3/8’’ x 30-3/4’’ 2-7/8’’ 1-1/4” Screws per board FS2831 Panel Bracket 3/4’’ Pan FS2830 Screws 2-1/2 FS2829 FS2828 INSIDE VIEW 1-3/4 FS2827 #12 x 3/4” Pan Screw (x8) 1-5/8 FS2826 1-1/4 1-1/4” Deck Screw (x8) FS2826 1.
  • Page 31 STEP 19 PF 6007 3/4’’ x 3-3/8’’ x 47-1/2’’ 2-1/2’’ Screws (2) PF 6025 3/4’’ x 3-3/8’’ x 29-1/4’’ 2-1/2’’ Screws 2-1/2’’ Screws 50-5/8’’ 2-1/2’’ Screws PF 6023 3/4’’ x 3-3/8’’ x 22-1/2’’ 62-5/8’’ 2-1/2’’ Screws FS2831 FS2830 2-1/2 2-1/2” Deck Screw (x19) 1.
  • Page 32 STEP 20 1’’ 1’’ 3-1/8’’ 3-1/8’’ 1-5/8’’ PF 6172 5/8’’ x 3-3/8’’ x 11-1/2’’ PF 6001 5/8’’ x 5-3/8’’ x 9-1/4’’ PRE-DRILL (4) 1/8’’ 1/2’’ GAP 1/2’’ GAP HOLES PF 6172 5/8’’ x 3-3/8’’ x 11-1/2’’ 17-3/8’’ 1-1/4” Screws per board FS2831 FS2830 PF 6172...
  • Page 33 STEP 21 1-1/4’’ (6) PF 6000 5/8’’ x 5-3/8’’ x 33-3/4’’ 1-1/4’’ GAPS BETWEEN BOARDS 1-3/16” (30 mm) Screws 2-1/8’’ per board (3) PF 6021 5/8’’ x 5-3/8’’ x 30-3/4’’ 2-1/8’’ GAPS BETWEEN BOARDS 1-1/4” Screws per board 1-3/16” (30 mm) Screws per board FS2831...
  • Page 34 STEP 22 (3) PF 6021 5/8’’ x 5-3/8’’ x 30-3/4’’ 2-1/8’’ GAPS BETWEEN BOARDS 2-1/8’’ 1-1/4” Screws per board (3) PF 6021 5/8’’ x 5-3/8’’ x 30-3/4’’ 2-1/8’’ GAPS BETWEEN BOARDS 2-1/8’’ 1-1/4” Screws per board FS2831 FS2830 2-1/2 FS2829 FS2828 1-3/4 FS2827...
  • Page 35 STEP 23 2-1/2’’ Screws PF 6144 1-3/8’’ x 3-3/8’’ x 47-1/2’’ 62-5/8’’ 2-1/2’’ Screws 2-1/2’’ Screws PF 6144 1-3/8’’ x 3-3/8’’ x 47-1/2’’ 31’’ 2-1/2’’ Screws 2-1/2’’ Screws Flush PF 6143 1-3/8’’ x 3-3/8’’ x 46’’ 2-1/2’’ Screws Hint!! Use parts from your Tube Slide. 2-1/2”...
  • Page 36 STEP 24 (2) PF 6000 5/8’’ x 5-3/8’’ x 33-3/4’’ 1-1/4’’ GAPS BETWEEN BOARDS PF 6142 1-3/8’’ x 3-3/8’’ x 30-5/8’’ 1-3/16” (30 mm) Screws 2-1/2’’ Screws per board 1-1/4’’ 23-5/8’’ 2-1/2” Deck Screw (x6) 1-3/16” (30 mm) Deck Screw (x8) 1.
  • Page 37 STEP 25 PF 6140 1-3/8’’ x 3-3/8’’ x 23-5/8’’ 2-1/2’’ Screws PF 6178 1-3/8’’ x 2-5/8’’ x 23-5/8’’ 2-1/2’’ Screws FLUSH WITH INSIDE OF POST PF 6146 1-3/8’’ x 3-3/8’’ x 8-1/4’’ 2-1/2’’ Screws PF 6181 5/8’’ x 3-1/4’’ x 3-3/8’’ 2-1/2’’...
  • Page 38 STEP 26 Flush 2-1/2’’ Screws 31’’ Flush 2-1/2’’ Screws PF 6024 3/4’’ x 3-3/8’’ x 27-3/4’’ 2-1/2’’ Screws 2-1/2’’ Screws PF 6024 3/4’’ x 3-3/8’’ x 27-3/4’’ 2’’ 1-1/4” Screws per board FS2831 1-5/8’’ 2’’ GAPS BETWEEN FS2830 BOARDS 2-1/2 (3) PF 6021 5/8’’...
  • Page 39 STEP 27 PF 6020 3’’ x 3’’ x 47-1/2’’ SWING BEAM SUPPORT TOP OF BEAM SUPPORT 84-1/2’’ FROM BOTTOM OF POST Loc Nut 5/16’’ Washer Wood Loc-Washer 5/16-18 X 6’’ Carriage Bolt 1. Install Swing beam support as shown.
  • Page 40 STEP 28 Swing Beam Flat Washer Swing Hanger Bolt Swing Hanger Flat Washer IMPORTANT! Final position of each Spring Clip is perpendicular to swing beam. Swing Hanger You may need to tap with hammer to get though holes. Spring Clip Swing Hanger Bolt must protrude at least Use a socket TWO Threads beyond Lock Nut.
  • Page 41 STEP 29 PF 6018 2-11/16’’x3’’x62’’ A-Frame SB Support 5/16”-18 x 7” Hex Head Bolt 3’’ Screws 3’’ Screws 5/16” Washer 5/16” Washer 5/16” Loc Nut (2) PF 6017 1-3/8’’x3-3/8’’x83’’ A-Frame 5/16”-18 x 2-1/2” Hex Head Bolt 5/16” Loc Washer 5/16” Washer 5/16”...
  • Page 42 STEP 30 (2) Swing Beam Bracket 5/16”-18 x 3-1/2” Hex Head Bolt 5/16” Washer 5/16” Loc Nut 5/16”-18 x 3-1/2” 5/16” Washer Hex Head Bolt 5/16” Washer 5/16” Washer 5/16” Loc Nut 1. Attach Swing Beam Bracket to A-Frame & Swing Beam as shown.
  • Page 43 STEP 31 Beam Brace 5/16”-18 x 3 1/4” Hex Head Bolt 5/16” Loc Washer 5/16” Washer 5/16-18 T-Nut Small 1. Install Swing Beam Brace as shown.
  • Page 44 STEP 32 5/16”-18 x 6” 5/16”-18 x 8-1/2” Carriage Bolt Hex Head Bolt 5/16” Loc Washer 5/16” Washer 5/16” Wood Loc Washer 5/16-18 T-Nut Small 5/16” Washer 5/16” Loc Nut 1. Install Swing Beam as shown.
  • Page 45 STEP 33 (1) 3’’ Deck Screws 1-5/8’’ 1-5/8’’ 13-1/2’’ Check to make sure structure is square. PF 6058 5/8’’ x 3-3/8’’ x 30’’ 1-3/16” (30 mm) Screws 3/4’’ CENTERED PF 6060 5/8’’ x 5-3/8’’ x 13’’ SUN 1-3/16” (30 mm) Screws 3”...

  • Page 46: Side View

    STEP 34 (10) 1-3/16” (30 mm) Screws (1) PF 6056 5/8’’ x 2’’ x 10’’ (2) PF 6059 5/8’’ x 2’’ x 7’’ Note: Place screws through A-Frame and CENTERED Note: PF 6053 into end of PF 6053 Rests on Top of PF 6056 2-1/2’’...
  • Page 47 STEP 35 3/4’’ Offset 1-5/8’’ Screws Each Side Side View 1-5/8’’ Screws 1-5/8’’ Screws 1-5/8’’ Screws 1-5/8” Deck Screw (x12) Attach Roof Frame to Tower as shown.
  • Page 48 STEP 36 2’’ Screws 2’’ Screws 2” Deck Screw (x8) 1. Attach Roof Side Support Boards as shown.
  • Page 49 STEP 37 3/4’’ Screws Flush to bottom. 3/16’’ Tarp Washer 3/4” Pan Head Screw (x6) 3/16” Tarp Washer (x6) NOTE: Hardware packaged with tarp. 1. Attach Tarp as shown.
  • Page 50 STEP 38 2-1/2’’ Screws per Rung (4) PF 6032 1’’ x 3-3/8’’ x 18-1/2’’ 2-1/2’’ Screws per Rung PF 6029 5/8’’ x 3-3/8’’ x 20-1/2‘’ FLUSH 2-1/2’’ Screws Hint!! Use parts and hardware from your Ladder Box. 2-1/2” Deck Screw (x20) 1.

  • Page 51: Underside View

    STEP 39 2-1/2’’ Screws Panel Bracket 3/4’’ Pan Screw UNDERSIDE VIEW 2-1/2” Deck Screw (x3) #12 x 3/4” Pan Screw (x4) 1. Attach Ladder to Tower as shown.
  • Page 52 STEP 40 ALIGN SCREWS WITH PRE DRILLS (1) PF 6013 5/8’’ x 5-3/8’’ x 22-3/4’’ ROCK WALL BOARD (6) PF 6389 5/8’’ x 5-3/8’’ x 22-3/4’’ ROCK WALL BOARD (4) 2’’ Deck Screws per board (1) PF 6013 5/8’’ x 5-3/8’’ x 22-3/4’’ ROCK WALL BOARD 2”...
  • Page 53 STEP 41 2-1/2’’ Screws per side Under Deck View 2-1/2” Deck Screw (x6) 1. Attach Rock Wall as shown.
  • Page 54 STEP 42 (2) 1/4’’ T-Nuts (2) 1-1/4’’ Hex Head Bolts (2) 1/4’’ Flat Washer Per Rock (2) 1/4’’ Loc-Washer Per Rock NOTE: Hardware packaged with rocks in bag. 1. Attach Climbing Rocks as shown.
  • Page 55 STEP 43 (2) PF 6039 3/4’’ x 3-3/8’’ x 9-3/4’’ 2-3/8’’ (2) PF 6133 3/4’’ x 3-3/8’’ x 41-1/2’’ TABLE 2’’ Screws TABLE SUPPORT OUTSIDE FACE TO (2) PF 6037 3/4’’ x 3-3/8’’ x 15-3/4’’ 3’’ 3’’ OUTSIDE BENCH SUPPORT FACE 2’’...
  • Page 56 STEP 44 1-5/8’’ Screws From Behind Deck Support Flush to Support Flush to Upright Underdeck View (3) 1’’ Truss Screws Grade FS2831 2” (2) #14 x 1-1/4” FS2830 Deck Screws 2-1/2 FS2829 PF 6009 1-3/8’’x3-3/8’’x17-1/4’’ Slide Stake FS2828 1-3/4 FS2827 1-5/8 1-3/16”...
  • Page 57 STEP 45 NOTE: Attach secondary handles at desired location Safety Warning Plate SA 4294 1/4” Washer ID Tag - SA 1699 1/4’’ x 1-1/4” 11” Pan Screw to the top of the handle. NOTE: Hardware packaged with accessory. Back View #8 x 1/2”...
  • Page 58 STEP 46 Wind Rider & Swing Mounting 51” Un-Coated chain Loc-Nut 5/16’’ Flat Washer QuickLink 5/16’’ Flat Washer 5/16”-18 x 6-1/2” Hex Bolt QuickLink (x4) Wind-Rider Wind Rider Assembly 1. Insert Seat into Handle as shown in (Step1). Secure in place with hardware shown. Note: Make certain no more than two bolt threads protrude from the Loc-Nut once fully tightened.
  • Page 59 STEP 47 1. Install Turbo Tube Slide as shown. NOTE: Turbo Tube Slide assembly detailed in instructions. Hardware included with accessory.
  • Page 60 STEP 48 PF 6136 1-3/8’’ x 3-3/8’’ x 11-1/4’’ PF 6145 1-3/8’’ x 3-3/8’’ x 8-3/8’’ 2-1/2’’ Screws PF 6138 1-3/8’’ x 3-3/8’’ x 18’’ 2-1/2’’ Screws PF 6145 1-3/8’’ x 3-3/8’’ x 8-3/8’’ 2-1/2’’ Screws PF 6138 1-3/8’’ x 3-3/8’’ x 18’’ PF 6138 1-3/8’’...
  • Page 61 STEP 49 5/16” Washer Fold up Anchor-It Strap 1-1/2” Lag Screw Anchor-It NOTE: Hardware packaged with Anchor-Its. 5/16’’ x 1-1/2” Lag Screw (x4) 5/16” Washer (x4) 1. Place swing set in fi nal location and mount Anchor-It(s) at locations circled above. 2.
  • Page 62 Swing-N-Slide® will repair, or at its discretion, replace any part within the stated warranty period which is defective in workmanship or materials. This decision is subject to verification of the defect upon delivery of the defective part to Swing-N-Slide® at 166 Etowah Industrial Ct.
  • Page 63 Got Questions? We’ve got answers! Call our Customer Support Representatives 1-800-882-0272 Available Monday - Friday, 8am - 5pm Technical support from experienced Swing-N-Slide customer service representatives who have actually built a swing set themselves. © Swing-N-Slide Inc. 2021 Printed in USA...