Facial Recognition - HIKVISION iDS-E08HQHI-B User Manual

3. Turn on Enable.
4. Optional: Check Save VCA Picture to save the captured pictures of VCA detection.
5. Set the detection rules and detection areas.
1) Set Arming Area. Up to 4 arming areas are selectable.
2) Adjust Sensitivity. Sensitivity: Range [0-100]. The higher the value is, the more easily the
detection alarm can be triggered.
3) Optional: Set Target Detection as Human or Vehicle to discard alarms which are not triggered
by human body or vehicle.
Note
This function is only available for certain models.
4) Click Draw Area and draw a quadrilateral in the preview window by specifying four vertexes of
the detection region.
6. Set the arming schedule. Refer to Configure Arming Schedule for details.
7. Set the linkage actions. Refer to Configure Alarm Linkage Action for details.
8. Click Apply.

6.4.3 Facial Recognition

Facial recognition is the function that compares a captured face (in image or video stream) with
those in face picture libraries and returns its identity information if the face is recognized. Based on
facial feature of human being, facial recognition first checks if human face exists in the input image
or video stream. If there is a human face, the function compares the face data (such as position,
size, and facial feature) with those in current face picture libraries to identify the person.
Note
This function is only available for certain models.
Face Capture
Face capture detects human faces appearing in the scene. Linkage actions can be triggered when a
human face is detected.
Steps
1. Go to Configuration → Event → Facial Recognition → Face Capture .
Digital Video Recorder User Manual
61