Live View - HIKVISION iDS-E08HQHI-B User Manual

Choose output to display local menu.
CVBS Output Brightness
Adjust the brightness of CVBS output image.
Output Standard
PAL and NTSC are selectable.
Enhanced IP Mode
Enabling enhanced IP mode will allow you to connect to the maximum number of cameras, but
disable 2K/4K output resolution, and make perimeter protection, human or vehicle detection of
motion detection, facial detection and face picture comparison functions unavailable in analog
channel.

6.1.2 Live View

Configure General Parameters
You can configure the output interface, mute or turning on the audio, event output interface, etc.
Steps
1. Go to Configuration → System → Live View → General .
2. Configure the Live View parameters.
Window Division
Select the live view window division.
Auto Switch Interval
The time to dwell in a camera before switching to next camera when auto-switch in live view
is enabled.
Alarm Pop-up Output
Digital Video Recorder User Manual
Figure 6-2 Live View-General
37