Network Camera - HIKVISION iDS-E08HQHI-B User Manual

If the power consumption of the DVR is lower than that of AF camera, when AF or AT camera
●
is connected, there is no video and Insufficient Power for PoC would be overlaid on the live
view image.
If the power consumption of the DVR is higher than that of the AF camera and lower than that
●
of the AT camera, when AF camera is connected, it would be powered on normally; when AT
camera is connected, it would be powered on and then powered off, thereafter, the DVR
displays Insufficient Power for PoC on the live view image.
If the power consumption of the DVR is higher than that of the AT camera, when AF or AT
●
camera is connected, it would be powered on normally.
4. Check the connected AF or AT camera number and the connectable camera number.
Note
The maximum connectable AT/AF camera number varies with different models.

6.3.3 Network Camera

Add Automatically Searched Online Network Camera
Add the network cameras to your video recorder.
Before You Start
Ensure your network camera is on the same network segment with your video recorder.
●
Ensure the network connection is valid and correct.
●
Ensure the network camera password is the same as your video recorder.
●
Steps
1. Go to Configuration → Camera → Camera .
2. Click Online Device List. The online cameras on the same network segment will be displayed in
the list.
3. Optional: Click Edit IP to edit camera IP addresses in batch. The system will allocate IP addresses
to the selected cameras in order.
Note
Ensure the selected cameras are activated.
4. Select a network camera, and click Add to add it.
Digital Video Recorder User Manual
Figure 6-12 Online Device
49