System Components - Rinnai Pro Series Installation Manual

System components

The ducted system comes in a number of boxes along with an accessory pack. The accessory
pack is included with the indoor unit—DO NOT throw away as these parts are required for
installation. Improper installation may result in water leakage, electrical shock and fire, or cause the
equipment to fail. Please note: Wired controllers are sold separately.
The illustrations below are representative only.
Accessory pack contains:
1. Soundproof / insulation x 2
2. Display control
3. Cord protection rubber ring x 2
4. External drain joint
5. Internal drain joint
6. Outlet pipe sheath
7. Outlet pipe clasp x 2
8. Seal ring
Wrap electric wires S1 & S2 (P & Q & E) around the magnetic ring twice (some models)
1
Hitch it on the connective cable between the indoor unit and outdoor unit after installation (some models)
2
Twist the electric wires L & N around the magnetic ring to five circles
3
1. 2.
6. 7.
11. 12.
7-9 kW models
Air outlet
Air inlet
Air inlet
Air
Air
outlet
outlet
Outdoor unit A
9.
10. Magnetic ring
11. Magnetic ring
12. Magnetic ring
13. Cable ties x 8
14. Fan coil condensate joiner
3.
8.
13.
Air inlet
Control
cabinet
Drain pipe
OR
Connection
pipe
Air inlet
Outdoor unit B
Copper nut x 2
1
2
3
4.
9.
14.
11-18 kW models
Air outlet
Air inlet
Air
outlet
Outdoor unit A
5.
10.
Air inlet
Air filter
Control
Drain
cabinet
pipe
Connection pipe
Air inlet
Air inlet
Air
outlet
Connection
cable
Outdoor unit B
| 7