Related Manuals for Rinnai POLO PC47C
Summary of Contents for Rinnai POLO PC47C
- Page 1 Models: REFRIGERANT PC47C POLOCOOL Portable Room Air Conditioner Operation & Installation Manual...
- Page 2 Before proceeding with the operation of your new Rinnai Portable Room Air Conditioner, please read this manual thoroughly and gain a full understanding of the requirements, features and operation of your new appliance.
-
Page 3: Table Of Contents
Table of Contents Important Information Safety Precautions Introduction Mandatory Inspection Prior to Installation .....................10 Warnings and Important Information Specifications Name of Each Part and Function Selection of Installation Location ......................13 Installation Accessories .........................13 Installation Assembly ...............................14 Operation of Control Panel ........................17 Control Panel Modes of Operation ..........................18 Setting the Timer ...........................18... -
Page 4: Important Information
Important Information Important Topics Regarding the Proper Use of this Air Conditioner Please contact your supplier for advice before returning unit Use this air conditioner only as described in this instruction manual. This appliance is fitted with a special safety device. When the compressor switches off or when the appliance is first turned on, this device prevents the compressor from switching on again for at least three minutes. -
Page 5: Safety Precautions
Safety Precautions Safety Precautions Read Safety Precautions Before Operation and Installation Installation must be performed according to the installation instructions. Improper installation can cause water leakage, electrical shock, or fire. To prevent death or injury to the user or other people and property damage, the following instructions must be followed. - Page 6 In a thunderstorm, the power must be cut off to avoid damage to the machine due to lightning. • Your air conditioner should be used in such a way that it is protected from moisture. • e.g. condensation, splashed water, etc. Do not place or store your air conditioner where it can fall or be pulled into water or any other liquid.
- Page 7 • Disconnect the power if strange sounds, smell, or smoke comes from it. Do not press the buttons on the control panel with anything other than your fingers. • • Do not remove any fixed covers. Never use this appliance if it is not working properly, or if it has been dropped or damaged.
- Page 8 WARNING for Using R32 Refrigerant Do not use means to accelerate the defrosting process or to clean, other than those recommended by the manufacturer. The appliance shall be stored in a room without continuously operating ignition sources (for example: open flames, an operating gas appliance or an operating electric heater). Do not pierce or burn.
-
Page 9: Introduction
Introduction This portable air conditioner can alter the room temperature and humidity. It has multiple functions of cooling, dehumidifying (drying) and fan ventilation, and can be moved from room to room and transported from building to building easily. This portable air conditioner can alter the room temperature and humidity. It has multiple functions of cooling, dehumidifying (drying) and fan ventilation. -
Page 10: Mandatory Inspection Prior To Installation
For safety and warranty purposes, appliances that may be damaged or incorrect MUST NOT be installed or operated under any circumstances. Installation of damaged or incorrect appliances may contravene local government regulations. Rinnai disclaims any liability or responsibility whatsoever in relation to the installation or operation of damaged or incorrect appliances. -
Page 11: Specifications
Specifications MODEL PC47C Power Supply V/Hz 220-240V / 50 Dimensions - Net (H x W x D) 775 x 568 x 365 Weight Nominal Cooling Capacity Maximum Input Current Maximum Input Power 1.98 Refrigerant Type Refrigerant Volume Sound Power Level dB(A) 775mm 568mm... -
Page 12: Name Of Each Part And Function
Name of Each Part and Function... -
Page 13: Selection Of Installation Location
Installation Selection of Installation Location Installation Accessories... -
Page 14: Assembly
Assembly... -
Page 17: Operation Of Control Panel
Control Panel Operation of Control Panel Only one mode of operation is available at any one time. Eg. Cool Mode, Dry Mode or Fan Mode only. NOTE... -
Page 18: Modes Of Operation
Modes of Operation y Water tank will require emptying. Setting the Timer This timer can be used to delay the appliance start up or shutdown. This avoids wasting electricity by optimising operating periods. PROGRAMMED START-UP y Tum on the appliance, choose the mode you want, for example cool, 24°C, high fan speed. Tum off the appliance. y Press the Timer button, the TIMER symbol and number of hours flash. -
Page 19: The Remote Control
Operation of Remote Control ! O PERATION OF REMOTE CONTROL! The Remote Control THE REMOTE CONTROL INSERTING THE BATTERIES • Slide and remove the protective cover (see Fig 13). • Insert two new batteries (not rechargeable) and Fig.13 make sure the(+) and(-) are in the correct position. •... - Page 21 SWITCH THE UNIT OF TEMPERATURE y When the appliance is running, press the button on the remote control, (or with the INCREASE and DECREASE buttons on the control panel selected together for 3 seconds at the same time), then you can change the unit of temperature. For example: Before change, in cool mode, the screen display (Fig 1).
-
Page 22: Water Drainage
Water Drainage Method ATER DRAINAGE METHODS! Water Drainage WATER DRAINAGE (Fig. 20) This air conditioner is equipped with the very latest MIST technology which means that the water tank does not have to be emptied. This has been verified by independent testing conducted both in Australia and overseas under extremely humid conditions. -
Page 23: Maintenance Methods
Maintenance and Service Maintenance Methods Cleaning the Air Filter... -
Page 24: End Of Season Operations
End of Season Operations... -
Page 25: Trouble Shooting
Trouble Shooting... -
Page 26: Self Diagnosis
The Appliance has a self diagnosis system to identify a number of malfunctions. Follow the proposed action when the code is displayed. (PROBE FAILURE) If this is displayed, contact Rinnai on 1300 555 545. Sensor damaged Empty the internal tank, see the section on “Water Drainage (FULL TANK) Method. -
Page 27: Warranty
Warranty Terms of Warranty - Australia Rinnai Australia Pty. Ltd. ABN 74 005 138 769, 100 Atlantic Drive, Keysborough VIC 3173. NOTICE TO CONSUMERS UNDER AUSTRALIAN CONSUMER LAW Our goods and services come with guarantees that cannot be excluded under the Australian Consumer Law. - Page 28 Normal Business Hours by an Authorised Service Representative. Repair by persons other than an Authorised Service Representatives may void the Warranty. 2.4 Alternatively to clause 2.3 above, Rinnai can at its discretion elect to pay you an amount equivalent to the cost of repairing or replacing the Product.
- Page 29 “7 Purchaser’s Responsibilities” on page 30; c) notifies Rinnai within 30 days of a defect occurring or, in the case of a latent defect, becoming apparent, that a claim is being made under this Warranty; and d) provides, in support of the claim made under this Warranty, a Proof of Purchase.
- Page 30 Rinnai to enquire about alternative arrangements. If you wish to make a warranty claim in respect of any fixed Product, please contact Rinnai on the details set out below to make arrangements for an Authorised Service Representative to inspect the product.
- Page 31 NOTES...
- Page 32 Monday to Friday, 8.00 am to 5.00 pm EST. *Cost of a local call higher from mobile or public phones. www.mypolo.com.au For further information visit www.rinnai.com.au or email enquiry@rinnai.com.au innai has a Service and Spare Parts network with personnel who are fully trained and equipped to give the best service on your innai appliance.